It is currently Mon Oct 26, 2026 4:20 pm

View unanswered posts | View active topics


Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » General Discussions

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
dieselenthusiast
 Post subject: How to resist battery terminal corrosion?
PostPosted: Mon Aug 06, 2012 11:38 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jan 06, 2007 1:54 am
Posts: 5827
Location: 7,000 feet, Zuni Mountains, New Mexico
I’ve never had battery terminal corrosion on any vehicle, but I’m fighting battery terminal corrosion on my Cherokee. After a month of cleaning, the terminals are corroded again. I’m using a 50/50 mix of water and baking soda and a toothbrush to clean with, which is working well. I need some type of terminal maintenance and was wondering what any of you recommend. I’ve heard of people using petroleum jelly but I haven’t personally tried using anything yet. It would seem that petroleum jelly would attract a lot of dust. Are there any other suggestions?

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.
Top
 Profile  
 
tjkj2002
 Post subject: Re: How to resist battery terminal corrosion?
PostPosted: Tue Aug 07, 2012 12:15 am 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
AGM battery
Top
 Profile  
 
liquidxit2
 Post subject: Re: How to resist battery terminal corrosion?
PostPosted: Tue Aug 07, 2012 4:57 pm 
Offline
LOST Junkie
User avatar

Joined: Wed Nov 12, 2008 12:09 pm
Posts: 886
Location: Dixie, Maryland
Getting a quality battery and using the terminal spray.

_________________
Fran:2002 Jeep Grand Cherokee Limited 4.7 quadra drive. 31in General Grabber AT2, OME HD, bilstein, IRO sway links, addco rear sway. Kolak 3in cat back flowmaster SUV 50, magnaflow 3in cat, airaid JR kit, ram air, P.I.E. aux adapter, surco 45x50, husky liners.http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=65276&p=719908#p719908
Top
 Profile  
 
dieselenthusiast
 Post subject: Re: How to resist battery terminal corrosion?
PostPosted: Tue Aug 07, 2012 9:54 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jan 06, 2007 1:54 am
Posts: 5827
Location: 7,000 feet, Zuni Mountains, New Mexico
tjkj2002 wrote:
AGM battery


That did cross my mind. The battery was already in the Jeep when I bought it 3 years ago. I just went outside and looked to see if I could identify the age of the battery. It's a wal-mart battery with a sticker that indicates it was shipped in November of 2008. For the sake of simple math, I'm going to assume that the battery was installed in December of 2008. That would make the battery approximately 3.5 years old. I'm sure the battery still has a fair amount of life left in it, but I'm almost annoyed enough to go ahead and swap it out for the DieHard Platinum P1 Group 34 AGM. Image

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.
Top
 Profile  
 
surfRenegade
 Post subject: Re: How to resist battery terminal corrosion?
PostPosted: Wed Aug 08, 2012 5:26 pm 
Offline
LOST Member
User avatar

Joined: Fri Nov 20, 2009 10:17 pm
Posts: 453
Location: Hermosa Beach, CA via Pittsburgh, PA
I just use that terminal grease and have absolutely no problems
Top
 Profile  
 
PUNKROCKPILOT
 Post subject: Re: How to resist battery terminal corrosion?
PostPosted: Wed Aug 08, 2012 5:36 pm 
Offline
LOST Newbie

Joined: Fri Jul 31, 2009 4:17 pm
Posts: 16
Location: San Diego
amazingly enough those little red and green felt circle pads have worked wonders for me, along with the terminal spray.

_________________
2006 Libby
Daystar 2.5"
30" BFG's A/T
Top
 Profile  
 
mikey1273
 Post subject: Re: How to resist battery terminal corrosion?
PostPosted: Wed Aug 08, 2012 8:29 pm 
Offline
LOST Addict
User avatar

Joined: Thu Jul 23, 2009 5:47 pm
Posts: 1817
Location: York,PA
PUNKROCKPILOT wrote:
amazingly enough those little red and green felt circle pads have worked wonders for me, along with the terminal spray.


I have those felt pads on my CRD's Autocraft Gold lead acid battery since I replaced the OEM red top in like November 2009 and no corrosion at all.

_________________
2006 Liberty CRD Limited Deep Beryl Green Metallic Clear coat, Fumoto valve, MH ProVent (removed), GDE Eco tune,
OME 790/948 springs, OME struts, OME N132L shocks, Jeepin by Al A-arms, Hercules Terra Trac AT2 245/75R16
Weeks Stage 1 EGR delete, 5 volt steel glow plugs
Top
 Profile  
 
dieselenthusiast
 Post subject: Re: How to resist battery terminal corrosion?
PostPosted: Wed Aug 08, 2012 8:56 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jan 06, 2007 1:54 am
Posts: 5827
Location: 7,000 feet, Zuni Mountains, New Mexico
From my understanding, batteries typically wont corrode unless they are leaking acid from the inside. For this reason, I like the AGM batteries since they wont corrode.

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » General Discussions

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com

Advertisements by Advertisement Management