Or you could save yourself the trouble of doing the rear and I'll send you my sport bumpers? Just a thought
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Surface Rust and value http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=71903 |
Page 1 of 1 |
| Author: | Tokyojoe [ Sat Oct 06, 2012 12:54 pm ] |
| Post subject: | Surface Rust and value |
Ok.....I am thinking of selling my KJ. I have two steel bumpers and they have surface rust on them. What do you guys recommend (what is the value of sanding down and repainting myself or sell as is)? |
|
| Author: | At The Helm [ Sat Oct 06, 2012 8:41 pm ] |
| Post subject: | Re: Surface Rust and value |
I would refinish them. Start with a wire wheel on an angle grinder to remove all the paint and most of the rust. Then use a sanding sponge. |
|
| Author: | CoopaTroopa [ Sat Oct 06, 2012 9:25 pm ] |
| Post subject: | Re: Surface Rust and value |
Or you could save yourself the trouble of doing the rear and I'll send you my sport bumpers? Just a thought
|
|
| Author: | Tokyojoe [ Sun Oct 07, 2012 7:14 pm ] |
| Post subject: | Re: Surface Rust and value |
Coopa....I still have my stock Renegade bumper fascia. 
|
|
| Author: | CoopaTroopa [ Sun Oct 07, 2012 10:10 pm ] |
| Post subject: | Re: Surface Rust and value |
Darn haha it was worth a shot! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|