| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| P0300 P0302 P2314 P2317 http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=73050 |
Page 1 of 1 |
| Author: | brubakes [ Sun Dec 30, 2012 2:19 pm ] |
| Post subject: | P0300 P0302 P2314 P2317 |
Last night out of nowhere my 2004 Jeep Liberty starting running very rough and had no power when depressing the gas pedal. I received the error codes when connected with an ODBII scanner. Any idea on cause and if its a solution I can perform myself? Money is tight with the holidays. P0300 Misfire random/multiple cylinder misfire detected. P0302 Cylinder two misfire detected P2314 Ignition coil E secondary circuit P2317 Ignition coil F secondary circuit P0300 Misfire random/multiple cylinder misfire detected. P0302 Cylinder two misfire detected P2314 Ignition coil E secondary circuit P2317 Ignition coil F secondary circuit |
|
| Author: | 99_XC600 [ Sun Dec 30, 2012 4:41 pm ] |
| Post subject: | Re: P0300 P0302 P2314 P2317 |
Sounds like a bad coilpack on cylinder #2. |
|
| Author: | brubakes [ Sun Dec 30, 2012 4:55 pm ] |
| Post subject: | Re: P0300 P0302 P2314 P2317 |
99_XC600 wrote: Sounds like a bad coilpack on cylinder #2. "coil pack" and "ignition coil" the same thing? Looking on RockAuto the coil is different then what I thought a "pack" would be. |
|
| Author: | brubakes [ Sat Jan 05, 2013 10:35 am ] |
| Post subject: | Re: P0300 P0302 P2314 P2317 |
Two of the ignition coils had failed. We replaced all of them to be safe because as well as the spark plugs for good measure. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|