Does the Liberty in effect have specified left and right front springs?
I've heard of members being a half an inch lower or higher on one side or the other after lifting their Jeeps.

I ordered CRD front springs from the dealer recently and there were 2 different part Numbers (879 AB, 878 AA) and one spring was noticeably thicker and had one more coil 11 vs. 10. So after some discussion with the partsman we decided it must be a mistake and reordered a 2 nd. thicker 880 AA CK spring with 11 coils on it.

So today I get out my old stock springs and sure enough there are 2 different part numbers on them, 877 AA CG and 878 AA CK and one spring is aprox. .020 thicker and have 11 coils each.

The Rusty's springs I presently have on are just marked Heavy Duty with no part numbers.

Bottom line, will it make any difference????

_________________
Slightly modified Lt. Khaki 3.7 2004 LTD 4X4. Purchased new 8/6/03.
What I don't have....A Mag light mounted to my seat.
Original Old L.O.S.T. #000354

Nick's Pics & Mods click here: http://www.cardomain.com/ride/531173
http://www.survivaltopics.com/forums/