My 2003 Liberty has gray bumpers and flares and they are weathered so I was thinking of painting it black so I went to a shop and was appraised $1100 for it. Ouch. any other ideas or should I do it or not.

_________________
Dave T. 1995 XJ, 2003 KJ with a 2" daystar lift with an K-N filter with procomp 7032 black wheels with Yoko's on them, Maga-flow exhaust, Hid headlights and HID foglights and Led lights mounted on a bracket near the tank for backing up and led lamps elsewhere also an ARB in the rear and a detroit truetrac in frt.

Rattle can? Some have usd plastidip spray.

_________________
2010 KK Deep Water Blue,OME Liftplus 1",JBA 5.5 UCA ,Dynaflow cat back exhaust, Weathertech VV & mats,Mopar skids,Atthehelm front bumper, Smittybilt XRC 10, Rigid LED's,RL Skink Supersliders,Gecko Safari Basket Detroit Truetrac rear, E-Locker front, G2, Dana 4.10's

I used rustoleum bumper & trim paint for plastic in a rattle can. It did a really good job. I painted them last July, and when I did a repair and needed to sand the repair, I noticed that I had to sand them pretty good till I got through the paint to the gray plastic.






If you paint them on the vehicle like I did you have to be meticulous with taping things off. I would recommend taking off the removable parts to paint.

_________________
2003/3.7 SOLD

2007 Wrangler - traded

2010 Wrangler Rubicon

go to auto paint shop they sell bumper paint in a spray can. Used it when i replaced my front bumper and it looks good and costs around $20 a can

_________________
2010 KK Liberty Renegade
Mods:
2 Hella 500 watt lights on front bumper
OME 2.5in lift
245/75r16 General Grabber at2
Cobra 75 WX ST
3ft firestik

The Rustoleum is around $6 a can, krylon makes a good plastic paint also but it has a much glossier finish in black. I think I had $25 in paint. Make sure to get all wax off the plastic.

_________________
2003/3.7 SOLD

2007 Wrangler - traded

2010 Wrangler Rubicon

My Line-X is still holding up good, I guess its been a couple of years now.

http://carphotos2.cardomain.com/images/0015/27/70/15847207_large.jpg

that line-x does look good but something tells me that is more then $1100.

_________________
Dave T. 1995 XJ, 2003 KJ with a 2" daystar lift with an K-N filter with procomp 7032 black wheels with Yoko's on them, Maga-flow exhaust, Hid headlights and HID foglights and Led lights mounted on a bracket near the tank for backing up and led lamps elsewhere also an ARB in the rear and a detroit truetrac in frt.

Plastidip. I did all my fenders and roof. I love it and easy to repair. Did it all for about $60 (7 a can). I will post pics shortly...

_________________
2002 Jeep Liberty RENEGADE - Custom painted fenders - 16" Cragar Soft 8's with 225/70/16 Yokohama Geolanders - Custom Black Logos - 2.5" SkyJacker Lift installed this week.
--WISH LIST---
245/75/16 BF Mud Terrains -Custom built Roof Tray -Custom built Storage Tray -Lasercut Rubber floor for entire inside (over carpet) - BoulderBars