LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Installing Trailer Brake Controller
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=7542
Page 1 of 1

Author:  Albert [ Mon Apr 10, 2006 7:19 pm ]
Post subject:  Installing Trailer Brake Controller

Somewhere there was a detailed instruction in here on this and I can't find it..Can anyone help?


It was a post with a link.

Thanks,
Al

Author:  0311_DoC [ Mon Apr 10, 2006 10:45 pm ]
Post subject: 

I wouldnt mind seeing that instruction a well...

Author:  Amarony [ Tue Apr 11, 2006 12:55 am ]
Post subject: 

http://www.jeepkj.com/forums/viewtopic.php?t=1691

not sure if it's what you need but hope it helps....

Author:  Albert [ Tue Apr 11, 2006 1:29 pm ]
Post subject: 

Amorony, -
Thanks - that was the link I couldn't find. It was very helpful. I ended up having the dealership install it as I was a little leary and the KJ is still under warranty so if anything goes wrong it is under warranty. Just for reference the controller I purchased was a Tekonsha Primus model that I got at a camper dealer for $109 as I was going to install it myself. Ended up taking it to the Jeep Dealer (gulp) and the dealer charged $103. to install ( 1 1/2 hr labor) for a total of $212. So I guess that's not too bad.

The KJ had a factory tow package so all the wireing was in place to the point in the harness under the dash. They still had to cut the red power wire and run a line to the battery with a seperate circuit braker. - - - -- You would think DC would have put a simple plug-in connector in the wiring harness on a vehicle rated to tow 5000lbs as they must know you're going to need brakes???? Oh well -

Now I'm choppin at the bit to tow the boat up to the lake............

Thanks again
Al

Author:  Jeepjeepster [ Tue Apr 11, 2006 2:28 pm ]
Post subject: 

have any pics of it?

Author:  Albert [ Tue Apr 11, 2006 4:03 pm ]
Post subject: 

Jeepjeepster.....................No pic's...I don't have the right equipment to post pic's. sorry...but the link noted above has pic's and it looks like that one.

Al

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/