| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Longer ball joints/spacer with JBA 4.5 UCA http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=75756 |
Page 1 of 1 |
| Author: | TheJawsOfDeath [ Thu Jun 27, 2013 9:23 am ] |
| Post subject: | Longer ball joints/spacer with JBA 4.5 UCA |
I was browsing the JBA site today, found something interesting in the pictures of the gen 4.5 arms. It looks like they're using a ball joint with a longer stud and a spacer between the knuckle and the boot. The pics show it with what looks like the adjust-a-strut suspension they sell. Anyone know anything more about this? I just fired off an email asking for more info/a part number. This would be nice for reducing the UCA angle and getting the balljoint farther away from the spring if you're running a taller lift. Check it out http://jeepinbyal.com/jeep-liberty-kj/j ... -arms.html |
|
| Author: | tommudd [ Thu Jun 27, 2013 9:44 am ] |
| Post subject: | Re: Longer ball joints/spacer with JBA 4.5 UCA |
Different style ball joint they used for a while, I've seen a couple of these that had the ring but recent ones don't In reality not that much difference I had spring contact with them and the later models |
|
| Author: | TheJawsOfDeath [ Thu Jun 27, 2013 12:36 pm ] |
| Post subject: | Re: Longer ball joints/spacer with JBA 4.5 UCA |
Do you have spring contact now? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|