What are the part numbers for the

Fender Flares
and
Wheel Well Liner

_________________
L.O.S.T. #31000

'03 KJ Freedom Edition - 4" JBA Coilover Lift w/ 32" Cooper STT PROs
'98 XJ Sport - 6" Full-Traction 4-Link Long Arm - Jeepspeed #2731 (Race Jeep)

DobermanRacing.com - Team Driver
Sponsored by UltRanger & CellTech

this is what I use for the fender flares and the front bumper....there are actually several different types of plastic fasteners used to attach the rear fender flares....I ripped a rear flare off one day and was able to reattach it with these....you don't really need a rivet gun to use these....just two pairs of pliers...

here in florida we have napa auto parts stores.....


napa plastic rivets

_________________
steve

'98 TJ sport gunmetal blue
33's with modifications to make them fit....still need a few more things....

first jeep....
'04 liberty sport 4x4 khaki
modified as recommended by L.O.S.T.....major fun on vacation....

L.O.S.T. (in fla.) #000496

You can look those up here, you did not say left or right fenderliner.

http://www.chryslerpartsdirect.com/

I need to re attach both front fenders, and the front left liner.

_________________
L.O.S.T. #31000

'03 KJ Freedom Edition - 4" JBA Coilover Lift w/ 32" Cooper STT PROs
'98 XJ Sport - 6" Full-Traction 4-Link Long Arm - Jeepspeed #2731 (Race Jeep)

DobermanRacing.com - Team Driver
Sponsored by UltRanger & CellTech

Is this what you are looking for?

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=170

Good luck.

_________________
'03 Sport 4x4 140k miles. Yeah, she's had some work done