LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Rivet part numbers
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=7578
Page 1 of 1

Author:  Myke [ Tue Apr 11, 2006 9:31 pm ]
Post subject:  Rivet part numbers

What are the part numbers for the

Fender Flares
and
Wheel Well Liner

Author:  camper [ Tue Apr 11, 2006 11:13 pm ]
Post subject: 

this is what I use for the fender flares and the front bumper....there are actually several different types of plastic fasteners used to attach the rear fender flares....I ripped a rear flare off one day and was able to reattach it with these....you don't really need a rivet gun to use these....just two pairs of pliers...

here in florida we have napa auto parts stores.....


napa plastic rivets

Author:  valvestem [ Wed Apr 12, 2006 6:31 pm ]
Post subject:  Re: Rivet part numbers

Myke wrote:
What are the part numbers for the

Fender Flares
and
Wheel Well Liner


You can look those up here, you did not say left or right fenderliner.

http://www.chryslerpartsdirect.com/

Author:  Myke [ Thu Apr 13, 2006 6:10 pm ]
Post subject: 

I need to re attach both front fenders, and the front left liner.

Author:  nolakj [ Fri Apr 14, 2006 6:00 pm ]
Post subject: 

Is this what you are looking for?

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=170

Good luck.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/