lifeprofit wrote:
Greetings All,
Just got my first jeep. 1956 M38A1 all stock. I really could use some help getting to know this jeep. Hoping someone who knows these can give a little advice.
Loosening the disributor lock down bolt won't allow distributor to rotate.
Fuel rich exhaust as though one cylinder isn't firing. Spark at all wires but not on electrodes of 3 plugs. Engine runs but missing on at least one.100 lb pressure on all cylinders.
Set points but cant rotate distrib to set timing. Set valves cold tomorrow.
Any suggestions are appreciated.
Paul
It sounds like a bad spark plug.