Right now, i have my fog lights wired like this:
I have a combination switch with the fog switch on the stalk, and i would like to use that instead of a separate switch. I've got a copy of the mopar installation instructions, but they aren't really helpful since i have a home made harness. Could someone with factory fogs installed take a look at their relay, and tell me where the wires run from each relay connection?
I've already tried splicing 85 into pin 2 of the harness of the combination switch, no go. I don't think there is enough power to trigger the relay. I know i'm going to have to do some hack and slash on my harness...not a problem. Any help would be greatly appreciated.