ARB Bumper with fogs

JeepJunky33 · **Posted:** Thu Oct 10, 2013 7:59 pm

Hey all,
soI have an ARB Bumper on my KJ (03) and the driver side fog light just went out.
how do I go about changing it? It seems like there is a brace right behind the plug.

please advise. This sort of thing drives me crazy

John3:17 · **Posted:** Thu Oct 10, 2013 8:16 pm

JeepJunky33 wrote:

Hey all,
soI have an ARB Bumper on my KJ (03) and the driver side fog light just went out.
how do I go about changing it? It seems like there is a brace right behind the plug.

please advise. This sort of thing drives me crazy

Bulbs are replaceable and can be removed fairly easy. I havnt had mine long but I think they twist in about a 1/4 turn. I put new ones in after we put the bumper on but I cant remember exactly.

tommudd · **Posted:** Thu Oct 10, 2013 9:01 pm

Have to pull the bumper out to get into the bulbs from behind
need it out about 3-4 inches

tjkj2002 · **Posted:** Thu Oct 10, 2013 9:16 pm

The fog light bulbs are super easy to change with the bumper in place,more then plenty of room.Like stated just a 1/4 turn and they come out,have to pull out at a slight angle though.I've had to pull mine a few times to replace the connector ends as I keep melting them running modified 65w 9005 bulbs

tommudd · **Posted:** Thu Oct 10, 2013 10:28 pm

I was never able to do that with mine, broke a bulb trying to swap one. They would hit the frame about 1/2 way out

tjkj2002 · **Posted:** Thu Oct 10, 2013 11:30 pm

tommudd wrote:

I was never able to do that with mine, broke a bulb trying to swap one. They would hit the frame about 1/2 way out

Gotta angle it a little and it comes right out.

JeepJunky33 · **Posted:** Fri Oct 11, 2013 9:03 am

Thanks guys. I was looking at it this morning and I think your right that angling it up as you pull it out might just work.
Fingers crossed.
I will keep all posted.

ARB Bumper with fogs

Who is online