| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| ARB Bumper with fogs http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=77011 |
Page 1 of 1 |
| Author: | JeepJunky33 [ Thu Oct 10, 2013 7:59 pm ] |
| Post subject: | ARB Bumper with fogs |
Hey all, soI have an ARB Bumper on my KJ (03) and the driver side fog light just went out. how do I go about changing it? It seems like there is a brace right behind the plug. please advise. This sort of thing drives me crazy |
|
| Author: | John3:17 [ Thu Oct 10, 2013 8:16 pm ] |
| Post subject: | Re: ARB Bumper with fogs |
JeepJunky33 wrote: Hey all, soI have an ARB Bumper on my KJ (03) and the driver side fog light just went out. how do I go about changing it? It seems like there is a brace right behind the plug. please advise. This sort of thing drives me crazy Bulbs are replaceable and can be removed fairly easy. I havnt had mine long but I think they twist in about a 1/4 turn. I put new ones in after we put the bumper on but I cant remember exactly. |
|
| Author: | tommudd [ Thu Oct 10, 2013 9:01 pm ] |
| Post subject: | Re: ARB Bumper with fogs |
Have to pull the bumper out to get into the bulbs from behind need it out about 3-4 inches |
|
| Author: | tjkj2002 [ Thu Oct 10, 2013 9:16 pm ] |
| Post subject: | Re: ARB Bumper with fogs |
The fog light bulbs are super easy to change with the bumper in place,more then plenty of room.Like stated just a 1/4 turn and they come out,have to pull out at a slight angle though.I've had to pull mine a few times to replace the connector ends as I keep melting them running modified 65w 9005 bulbs |
|
| Author: | tommudd [ Thu Oct 10, 2013 10:28 pm ] |
| Post subject: | Re: ARB Bumper with fogs |
I was never able to do that with mine, broke a bulb trying to swap one. They would hit the frame about 1/2 way out |
|
| Author: | tjkj2002 [ Thu Oct 10, 2013 11:30 pm ] |
| Post subject: | Re: ARB Bumper with fogs |
tommudd wrote: I was never able to do that with mine, broke a bulb trying to swap one. They would hit the frame about 1/2 way out Gotta angle it a little and it comes right out. |
|
| Author: | JeepJunky33 [ Fri Oct 11, 2013 9:03 am ] |
| Post subject: | Re: ARB Bumper with fogs |
Thanks guys. I was looking at it this morning and I think your right that angling it up as you pull it out might just work. Fingers crossed. I will keep all posted. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|