|
I went the cheapest route but had it done by an upohlstery shop. Take both front seats out, disassemble both butt cushions. Put your passenger one on the drivers side, less or little wear especially on the visible left side, and probably not crushed down either. Then take the other cushion (formerly the driver cushion) to the upohlstry shop. They can sew in a panel real close to factory, have them reinforce the stretch material also, and add a little foam. Then put it back on your passenger seat. This way, you are driving your jeep while the other cushion is at the shop, and you have done all the labor to remove an install. Mine cost me $75, no down time and looks fine.
_________________ 2002 KJ 4X4, 3.7, 5 speed, offroad pkg, loaded, Moabs and Hankook A/Ts, Kenwood/ Alpine sound. Tommudd 3.5" econo lift and JBA A arms
|