Does anyone remember if forum username (INC) installed an aftermarket front diff cover? I thought I remember him installing one????? If I remember right, the D30a uses the same cover as the D30. With that being said, does the OE D30a cover utilize the breather tube? I was looking for an aftermarket pan under the assumption it would hold more gear lube, otherwise, it's not a big deal.... I was just curious how INC did it.

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.

Can't install a aftermarket one
For one it would interfere with the mounting bracket
two you wouldn't have any breather
On to finding something else you can replace

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Yeah, the breather tube dilemma would certainly be an issue. I remember INC installing one, I just don't remember all the details. And if I remember correctly, he installed front and rear covers made by Rockcrusher.

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.

That was when he went SFA.

Oh, that would make sense. Thanks for clarifying.

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.