Just ask the dealer, glad for you i they do ist for free, otherwise i recommend the MOOG LBJ´s. They are also greasable. I´ve built them at 100k miles in my KJ and now i´m waiting at which miles they are done...
bye,
samse
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Lower Ball Joints http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=77985 |
Page 1 of 1 |
| Author: | KJ_Dave [ Sun Jan 12, 2014 12:50 pm ] |
| Post subject: | Lower Ball Joints |
I was changing my brake pads today and noticed the dust boots on the lbjs were cracked and ripped up. I had the original recall done way back when it came out. Would they replace them again under the recall or am I SOL and need to pay for it? |
|
| Author: | samse2101 [ Sun Jan 12, 2014 1:03 pm ] |
| Post subject: | Re: Lower Ball Joints |
Just ask the dealer, glad for you i they do ist for free, otherwise i recommend the MOOG LBJ´s. They are also greasable. I´ve built them at 100k miles in my KJ and now i´m waiting at which miles they are done... bye, samse |
|
| Author: | KJScott [ Mon Jan 13, 2014 6:00 pm ] |
| Post subject: | Re: Lower Ball Joints |
if the dealer says no, will you be replacing them yourself? My recalled LBJs were shot as well. I replaced them with the Moogs a few weeks ago. |
|
| Author: | tommudd [ Mon Jan 13, 2014 8:01 pm ] |
| Post subject: | Re: Lower Ball Joints |
I replaced mine the first go around, dealer didn't, never asked for a refund. It was an upgrade so figured why go through the hassle |
|
| Author: | JdubKJ03 [ Mon Jan 13, 2014 9:58 pm ] |
| Post subject: | Re: Lower Ball Joints |
Question on the Moogs? Once pressed in, the bottom lip should be completly flush with the knuckle yes? Reason I ask is I had a hell of a time getting them pressed flush, even with my large bj press. |
|
| Author: | The_dealer [ Fri Jan 17, 2014 9:18 pm ] |
| Post subject: | Re: Lower Ball Joints |
I've read on a few different forums that dealer will replace them as many times as it takes. I dont know how true that is, so if anyone knows for certain I'd like to know as well Sent from my Lumia 900 using Tapatalk |
|
| Author: | riptricket [ Sat Jan 18, 2014 12:07 am ] |
| Post subject: | Re: Lower Ball Joints |
Just make sure to get a 90degree elbow for the greasers for I didnot put it in and have to take it apart and fix |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|