| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Front driveshaft install problem 02 http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=79388 |
Page 1 of 1 |
| Author: | Chipppy [ Wed Jun 18, 2014 5:34 pm ] |
| Post subject: | Front driveshaft install problem 02 |
I feel like an idiot. I've taken my driveshaft out several times but this time I had to disassemble the front cv I order to remove it. I have a rebuilt replacement I am having trouble reinstalling. And tips? Sent from my iPhone using Tapatalk |
|
| Author: | JeepMorrison [ Wed Jun 18, 2014 6:41 pm ] |
| Post subject: | Re: Front driveshaft install problem 02 |
Slide it into the diff first then collapse it and slip it into the transfer case Sent with the power of children's screams!!! |
|
| Author: | Chipppy [ Wed Jun 18, 2014 6:48 pm ] |
| Post subject: | Re: Front driveshaft install problem 02 |
I may have bent my exhaust and it no longer slips right in. I will try from the other side doing this method. Sent from my iPhone using Tapatalk |
|
| Author: | Chipppy [ Wed Jun 18, 2014 10:00 pm ] |
| Post subject: | Front driveshaft install problem 02 |
4x4kayak2112 wrote: Slide it into the diff first then collapse it and slip it into the transfer case Sent with the power of children's screams!!! The 06 I am almost certain has a different exhaust routing than my 02 |
|
| Author: | JeepMorrison [ Thu Jun 19, 2014 1:48 am ] |
| Post subject: | Re: Front driveshaft install problem 02 |
I have done it to my buds 02, father in laws 04, and my 06....all worked the same way. Sent with the power of children's screams!!! |
|
| Author: | Chipppy [ Sat Jun 21, 2014 12:27 pm ] |
| Post subject: | Re: Front driveshaft install problem 02 |
Will try and wrap my head around this little puzzle I've got going here lmao still feel like an idiot Sent from my iPhone using Tapatalk |
|
| Author: | USPLibby [ Sun Jun 22, 2014 8:05 pm ] |
| Post subject: | Re: Front driveshaft install problem 02 |
There is a transfer case linkage near the that you can undo and leave loose to get the front drive shaft some wiggle room above the Xfer case. 3 bolts, 15mm I think. |
|
| Author: | JdubKJ03 [ Mon Jun 23, 2014 8:24 pm ] |
| Post subject: | Re: Front driveshaft install problem 02 |
Good tip USP. This is what I ended up having to do when I did mine. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|