| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rack and Pinion Install Question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=79854 |
Page 1 of 1 |
| Author: | 65Corvair [ Tue Aug 12, 2014 10:21 pm ] |
| Post subject: | Rack and Pinion Install Question |
I will be replacing my rack and pinion soon. I have already picked up the remaned rack from NAPA. I currently have 2 new Moog inner tie rods sitting on the self in my garage. Would it be better to install those and replace the ones with an unknown amount of use on them? |
|
| Author: | tjkj2002 [ Wed Aug 13, 2014 12:02 am ] |
| Post subject: | Re: Rack and Pinion Install Question |
The remaned rack will come with brand new inner tie rod ends attached already. |
|
| Author: | 65Corvair [ Wed Aug 13, 2014 8:51 am ] |
| Post subject: | Re: Rack and Pinion Install Question |
One side feels new and stiff, but the other feels used and moves freely. They also do not have wrench flats like most other aftermarket inner tie rods. That is why I suspect they are used and not new. |
|
| Author: | 65Corvair [ Mon Aug 18, 2014 11:00 pm ] |
| Post subject: | Re: Rack and Pinion Install Question |
I am going to change the tie rods. I am not worried about the warranty of the rack because I changed the hard lines to the original ones from my Jeep. The ones on the remanned rack were bent and kinked in some spots. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|