LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

a/c only works on 3 or 4?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=80058		 Page 1 of 1
Author:  JDaPP [ Sun Aug 31, 2014 8:35 pm ]
Post subject:  a/c only works on 3 or 4?
Ac has worked fine and then this morning I got in and the ac will only work on the #3 or 4 setting. Works just like it should on those settings, but 1 or 2 the fan does not blow. You can still feel cool air coming from the vent but no blowing fan. Anyone have any ideas? No other issues with temp, etc.
Author:  tjkj2002 [ Sun Aug 31, 2014 8:40 pm ]
Post subject:  Re: a/c only works on 3 or 4?
Bad blower motor resistor,behind the glove box.get the beefier sebring version('05 model year?).
Author:  JDaPP [ Sun Aug 31, 2014 8:41 pm ]
Post subject:  Re: a/c only works on 3 or 4?
Perfect thanks!
Author:  JeepinJarhead03 [ Tue Sep 02, 2014 1:33 am ]
Post subject:  Re: a/c only works on 3 or 4?
Part number is ru1040 for the Sebring one like troy suggested
Author:  JDaPP [ Tue Sep 02, 2014 6:39 am ]
Post subject:  Re: a/c only works on 3 or 4?
Thanks. Rockauto has good pricing on these if anyone needs one.
Author:  papaindigo [ Wed Sep 03, 2014 4:10 pm ]
Post subject:  Re: a/c only works on 3 or 4?
From an old post

The brand is BWD and part number is RU1040 and is listed for a 2001-2004 Chrysler Sebring. To get to the resistor open the glove box then press inward on the latch arms on the left and right side to let it drop down further. The resistor is right there held on by two 5/16 hex head screws. You need to pull out on the red tab about 1/4" to push the release and it required some pressure to get the red tap to pull out.
Author:  ArmyChief [ Tue Nov 25, 2014 4:03 pm ]
Post subject:  Re: a/c only works on 3 or 4?
papaindigo wrote:
From an old post

The brand is BWD and part number is RU1040 and is listed for a 2001-2004 Chrysler Sebring. To get to the resistor open the glove box then press inward on the latch arms on the left and right side to let it drop down further. The resistor is right there held on by two 5/16 hex head screws. You need to pull out on the red tab about 1/4" to push the release and it required some pressure to get the red tap to pull out.


Just for my knowledge, what about this is beefier? (do we have current specs for the original and this one?)

Thanks
Author:  ArmyChief [ Tue Nov 25, 2014 4:06 pm ]
Post subject:  Re: a/c only works on 3 or 4?
JDaPP wrote:
Thanks. Rockauto has good pricing on these if anyone needs one.


Just did a search on RockAuto by RU1040 and shows nothing found :(
Author:  ArmyChief [ Tue Nov 25, 2014 4:09 pm ]
Post subject:  Re: a/c only works on 3 or 4?
The Standard Motor Products (SMP) version of this resistor is RU347. Available at RockAuto for $16.32 (at time of this post) :)
Author:  wheeee32 [ Fri Nov 28, 2014 2:22 pm ]
Post subject:  Re: a/c only works on 3 or 4?
I definitely love the new blower motor resistor. It's a much beefier part than the old one.
Author:  Franko [ Fri Nov 28, 2014 2:28 pm ]
Post subject:  Re: a/c only works on 3 or 4?
Hmm I think this is what I need, my heat only blows on the #4 setting.
The other setting the fan won't blow at all. I'll try my local parts store and see if I can find that one.
Author:  ArmyChief [ Fri Nov 28, 2014 2:44 pm ]
Post subject:  Re: a/c only works on 3 or 4?
Almost $50 at parts store!...RockAuto was $16
Author:  Franko [ Sat Nov 29, 2014 6:20 pm ]
Post subject:  Re: a/c only works on 3 or 4?
Done and done, works like a charm.
Thanks all.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/