| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| rear heated back glass http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=80634 |
Page 1 of 1 |
| Author: | riptricket [ Thu Nov 13, 2014 11:37 pm ] |
| Post subject: | rear heated back glass |
Somehow it got too HOT and melted. Anyone know how to fix it? |
|
| Author: | riptricket [ Thu Nov 20, 2014 12:03 am ] |
| Post subject: | Re: rear heated back glass |
Anyone? |
|
| Author: | papaindigo [ Thu Nov 20, 2014 10:19 am ] |
| Post subject: | Re: rear heated back glass |
What part of it got too hot and melted? |
|
| Author: | dennyb [ Wed Dec 03, 2014 8:11 pm ] |
| Post subject: | Re: rear heated back glass |
I had similar problem. The previous owners dog destroyed the horizontal lines There are repair kits if you have only one or two small scratches in the painted on "wires". Auto parts stores carry them. Mine was bad enough I changed it out with one from the local U-pull junkyard for 60.00. |
|
| Author: | riptricket [ Sat Dec 06, 2014 12:07 pm ] |
| Post subject: | Re: rear heated back glass |
The part that goes on the window has melted off. |
|
| Author: | papaindigo [ Mon Dec 08, 2014 2:22 pm ] |
| Post subject: | Re: rear heated back glass |
I hate to be difficult but "The part that goes on the window has melted off." is not very specific as the defrost grid and plug all are "on the window". I suspect the grid that covers the inside of the window has not melted off but if it has they you can likely get a junkyard replacement window with a good grid or simply scarp off the old stuff and install any of a host of after market replacement grids. If, as is more likely, the plug that attaches a power wire to the grid has melted off there are a variety of repair options on Amazon or other sites such as http://www.frostfighter.com/index.htm and possible local parts stores. |
|
| Author: | dennyb [ Thu Dec 11, 2014 12:37 am ] |
| Post subject: | Re: rear heated back glass |
from Auto parts stores you can get copper blended super glue. Not guaranteed but worth a shot. Then just glue it to the back of the glass. made by both permatex and locktite brands. (part #21351) |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|