It is currently Mon Nov 02, 2026 7:17 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 29 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: PCV Valve
PostPosted: Mon Nov 09, 2009 2:16 pm 
Offline
LOST Newbie
User avatar

Joined: Sun May 28, 2006 2:46 pm
Posts: 84
Location: Jacksonville,Fl
I tried to change out the PCV valve and could not get the vacuum hose off. Anybody ever change theirs out and is there some special technique to get the hose off without damaging?

_________________
2002 Jeep Liberty Sport
Shale Green
OME HD's
Rancho 17505 & 17004
Firestone Destination A/T- 245/75R16


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 09, 2009 3:11 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jul 14, 2009 12:20 pm
Posts: 1881
Location: Orange Park, FL
Mine just pulled right off.
Did you give it a good wiggle while pulling?


Btw, nice to see someone in the area on here!

_________________
'02 Jeep KJ 4x4- Gone
'92 YJ- lift, swampers, bumpers....yeah, its pretty sweet.
*DISCLAIMER*: I can not be held liable for anything I say on the forums or in real life.
I also can not be held liable for any jeep breakage or life problems caused due to my advice being taken.
:D


Top
 Profile  
 
 Post subject: Re: PCV Valve
PostPosted: Mon Nov 09, 2009 4:44 pm 
Offline
LOST Member
User avatar

Joined: Thu Jul 07, 2005 7:01 pm
Posts: 222
pssbarry wrote:
I tried to change out the PCV valve and could not get the vacuum hose off. Anybody ever change theirs out and is there some special technique to get the hose off without damaging?


It has probably just "glued" itself to it's attachment point, use a little L-shaped tool to get under it in one spot and work around to break the seal, a little WD-40 might help. Don't force it, be patient, and it'll give up.

Here's a diagram I have of both the 2.4 & 3.7 setups.

Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 09, 2009 10:57 pm 
Offline
LOST Newbie
User avatar

Joined: Sun May 28, 2006 2:46 pm
Posts: 84
Location: Jacksonville,Fl
It was on there pretty good but I finally got it off and replaced.
Thanks for the info.

_________________
2002 Jeep Liberty Sport
Shale Green
OME HD's
Rancho 17505 & 17004
Firestone Destination A/T- 245/75R16


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 11, 2009 3:48 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
Hey guys, quick question, I was looking to change this, but on my '07, it's not there, lol. Just wondering if it moved on the newer years.

Thanks, Dean


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 11, 2009 4:25 pm 
Offline
LOST Member
User avatar

Joined: Thu Jul 07, 2005 7:01 pm
Posts: 222
infernicus wrote:
Hey guys, quick question, I was looking to change this, but on my '07, it's not there, lol. Just wondering if it moved on the newer years.

Thanks, Dean


You have the 3.7 motor? Look on the oil fill tube, it's the funnel-shaped black vertical apparatus on the front of the motor. The PCV has a mounting point on this funnel shape oil fill tube, it should be the only thing with a small rubber hose coming out of it. Best I can do without seeing your engine. Take and post a pic if you can of the front of your Jeep motor.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 11, 2009 4:50 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
Haha, yeah, I know what the oil filler tube is, I changed my oil last week, and while changing my spark plugs this morning I was searching for the PCV Valve.. I must be blind..
Click the pics to see them bigger
Image

Image

Let me know if you need better pictures..

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3

Sold-1988 Suzuki Samurai
2002 Jeep TJ


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 11, 2009 7:28 pm 
Offline
LOST Member
User avatar

Joined: Thu Jul 07, 2005 7:01 pm
Posts: 222
OK man I believe you now, it's not there. :shock: Have to wait for someone else with an 07 who knows where it is. :wink:
I could not find anything on the web either.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 11, 2009 7:32 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
haha, cool, I thought maybe I was going crazy. :)

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3

Sold-1988 Suzuki Samurai
2002 Jeep TJ


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 11, 2009 7:47 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 11, 2005 1:03 pm
Posts: 8052
Location: Kentuckeeee
Yeah, for some odd reason they moved it on the 07's. Cant remember where but its on the back somewhere.

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 11, 2009 7:52 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
On the back of the engine? or the back of the Oil Filler? on the back of the Jeep? :P well, not there.. but yeah..


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 11, 2009 8:32 pm 
Offline
LOST Member
User avatar

Joined: Fri May 01, 2009 11:31 am
Posts: 131
Location: HERMOSILLO, MEXICO
i did some research, didnt find anything, i have a 07. i'll keep searching info.

_________________
KJ SPORT 4X4 2007
OME 927 & OME 948
RANCHO RS9000 FRONT & REAR
CLEVIS LIFT
DUNLOP ROVER M/T MAXX TRACTION LT245/75/R16
MOPAR SKID PLATES
BIKE RACK
OPTIMA RED TOP
JBA---UCA NEW


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 11, 2009 8:42 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
Cool, thanks.. Is it even possible that they got rid of it altogether? Probably not because it's listed in the Maintenance Manual.

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3

Sold-1988 Suzuki Samurai
2002 Jeep TJ


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 11, 2009 8:43 pm 
Offline
LOST Member
User avatar

Joined: Fri May 01, 2009 11:31 am
Posts: 131
Location: HERMOSILLO, MEXICO
i have the 06 manual. i'll check at the local dealer. i have a friend working there.

_________________
KJ SPORT 4X4 2007
OME 927 & OME 948
RANCHO RS9000 FRONT & REAR
CLEVIS LIFT
DUNLOP ROVER M/T MAXX TRACTION LT245/75/R16
MOPAR SKID PLATES
BIKE RACK
OPTIMA RED TOP
JBA---UCA NEW


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 11, 2009 8:50 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
Sweet, I need one of those.. The friend, not the Manual, haha.

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3

Sold-1988 Suzuki Samurai
2002 Jeep TJ


Top
 Profile  
 
 Post subject:
PostPosted: Sun Nov 15, 2009 11:21 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jan 06, 2007 1:54 am
Posts: 5827
Location: 7,000 feet, Zuni Mountains, New Mexico
I also have a 2007. And from my understanding, our 2007 KJ 3.7 is the same motor at the 2008 KK, just a few minor changes, The 2007 requires different motor oil due to the all temp. change. We no longer have a transmission dipstick, and the 2007 doesn't technically have an alternator, it's a recharging system.

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 16, 2009 12:19 pm 
Offline
LOST Newbie
User avatar

Joined: Thu Nov 06, 2008 12:52 pm
Posts: 69
Location: Barrie, Canada
05+, the PCV is to the right of the air box, near front of engine.

Cheers,

_________________
05 Renegade - Dark Khaki Pearl
Frankenlift IIP, Stealth JBA 4.5's, Mobil1 Synth.& Filter, PIAA Extreme White, Amsoil EA Filter (RIP), Spidertrax 1.25, 245/75/16 Duratracs


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 16, 2009 12:42 pm 
Offline
LOST Addict

Joined: Mon Oct 17, 2005 9:27 am
Posts: 2247
Location: Woodward Ave
Sorry to keep the confusion train rolling:

I was under the impression that for 2007 the PCV was located on the rear of the valve cover, drivers side.

Can't confirm or deny that I know this information to be accurate.

_________________
02 Liberty Limited
Silver Outside & Taupe Inside
Heated Seats, Sunroof & Infinity speakers
USA Spec I-Pod adaptor, Mopar Sub, Garmin GPS
Tow Package, Select-Trac
Rock Rails, Tow Hooks


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 16, 2009 12:47 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
Luke09 wrote:
05+, the PCV is to the right of the air box, near front of engine.

Cheers,
That is the engine breather filter,the PCV valve on '02-'06 3.7's are mounted in the oil fill tube.The '07+ 3.7's (KJ/KK) moved the PCV valve to one of the valve covers if I remember correctly.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 16, 2009 12:55 pm 
Offline
LOST Newbie
User avatar

Joined: Thu Nov 06, 2008 12:52 pm
Posts: 69
Location: Barrie, Canada
That's weird ... mine is not on the oil filler tube.

_________________
05 Renegade - Dark Khaki Pearl
Frankenlift IIP, Stealth JBA 4.5's, Mobil1 Synth.& Filter, PIAA Extreme White, Amsoil EA Filter (RIP), Spidertrax 1.25, 245/75/16 Duratracs


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 29 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com