I'm about to have a Crane Diff Cover installed, but before I do, I need to know what socket to use for these bolt heads. Anyone know? Sorry for the poor pic quality, but the bolt is star shaped.

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.

From what I see on line they are 12-point and should fit an appropriate size standard 12-point socket.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

First diff fluid change I did I swapped them out for regular style headed bolts, grade 8 of course but easier to remove every time

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Thanks. I'm not familiar with these types of sockets, but you're clearly right. I will go ahead and use them this time around. If I decide that I don't like them, then I'll replace them as Tom mentioned.

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.