I'm about to have a Crane Diff Cover installed, but before I do, I need to know what socket to use for these bolt heads. Anyone know? Sorry for the poor pic quality, but the bolt is star shaped.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| What socket for Crane Diff Cover bolts? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=81250 |
Page 1 of 1 |
| Author: | dieselenthusiast [ Sat Jan 31, 2015 4:46 pm ] |
| Post subject: | What socket for Crane Diff Cover bolts? |
I'm about to have a Crane Diff Cover installed, but before I do, I need to know what socket to use for these bolt heads. Anyone know? Sorry for the poor pic quality, but the bolt is star shaped.
|
|
| Author: | papaindigo [ Sat Jan 31, 2015 5:26 pm ] |
| Post subject: | Re: What socket for Crane Diff Cover bolts? |
From what I see on line they are 12-point and should fit an appropriate size standard 12-point socket. |
|
| Author: | tommudd [ Mon Feb 02, 2015 1:47 pm ] |
| Post subject: | Re: What socket for Crane Diff Cover bolts? |
First diff fluid change I did I swapped them out for regular style headed bolts, grade 8 of course but easier to remove every time |
|
| Author: | dieselenthusiast [ Fri Feb 06, 2015 12:32 am ] |
| Post subject: | Re: What socket for Crane Diff Cover bolts? |
papaindigo wrote: From what I see on line they are 12-point and should fit an appropriate size standard 12-point socket. Thanks. I'm not familiar with these types of sockets, but you're clearly right. I will go ahead and use them this time around. If I decide that I don't like them, then I'll replace them as Tom mentioned. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|