| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Transmission monitor KJ 3.7 42RLE PCI bus http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=81355 |
Page 1 of 1 |
| Author: | Jeep Explorer [ Sat Feb 14, 2015 10:42 am ] |
| Post subject: | Transmission monitor KJ 3.7 42RLE PCI bus |
I'm a hobby programmer and have written a windows program for the Jeep KJ 3.7 in the last 12 months. This program shows the status of a 42RLE transmission. After a few test drives it seems to work well. I have uploaded a video to YouTube which is showing such a test drive. The program runs on a laptop with bluetooth and is using an ELM327 bluetooth adapter. YouTube link: http://youtu.be/8ZrLmeXtnvs If you have an ELM327 bluetooth adapter you can also download a test version of my program from here. |
|
| Author: | RenKJ [ Tue Feb 17, 2015 4:35 pm ] |
| Post subject: | Re: Transmission monitor KJ 3.7 42RLE PCI bus |
Wow this is sick, people have been trying to figure out how to get transmission temp out of the elm dongles for torque as well, havent seen anything yet. Ps.. if you have the hex info and offset for the trans temp plz post, id love to get it working in torque. |
|
| Author: | Jeep Explorer [ Wed Feb 18, 2015 5:33 am ] |
| Post subject: | Re: Transmission monitor KJ 3.7 42RLE PCI bus |
This OBD program is working with OBD PID's via the diagnostic request. OBD-II PIDs - Wikipedia, the free encyclopedia The OBD PID's for the transmission temperature, etc. do not belong to these standard PID's and they are very hard to find. Therefore my program reads the PCI bus messages directly. |
|
| Author: | dieselenthusiast [ Wed Feb 25, 2015 9:38 pm ] |
| Post subject: | Re: Transmission monitor KJ 3.7 42RLE PCI bus |
Very impressive, Jeep Explorer. Job well done. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|