How would an OME spring turn out mounted on a new OEM strut? Thinking about going OME springs, long ome shock in the rear with a stock OEM set of new struts, maybe top plate and rear isos to get to 3", need some input.

The OME struts are valved specifically to coincide with the springs (impulses?), anyhow, it would ride crappy if you do that. Likely even dangerous on a lifted SUV, don't risk your life.

_________________
05 CRD: H.D.S2 stat,WW Ironrock trilink&LCA's, OX rear,ARB front, 4.10's, ARB bumper, Suncoast,OME 3.5, JBA UCA,rock rails, Moabs&265/75 Duratracs, GDE tunes ,FFD fan,ARP's, 2 micron fuel, new valves,sasquatch battery tray & grid heater, tensioner relocated
Mech fan, VH & AC delete

The stock shocks blow.....dont do it.

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Yes what they said, stock OEM "shocks" are junk from the get go, team them up with a good set of springs and they will wear the new springs out faster

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Thats what i figured thanks for the input gents

Would bilsteins be a viable option to go with instead, are they much cheaper at all?

I run Bilstein struts with OME coils. Happy with them overall and they have held up far better than my previous set of Monroes

_________________
02 LIberty Renegade
OME/Bilstein
JBA Gen4.5
IRO 3 Linked
245/75 Duratracs

I run OME/Bilstein. Works great. Not sure about the fronts, but I know the rear Bilsteins are cheaper than OME.

_________________
2011 Deep Cherry Red KK - Skyslider - JBA/Bilstein Adjust-A-Strut set at 3.5" - OME 731 Rear Springs - Bilstein Rear Shocks - Al's A-arms - 245/75-16 Duratracs - Rock Liazard Super Sliders

I do have OME 132Ls in back though. Ome coils...nice having that little extra bit of flexibility

_________________
02 LIberty Renegade
OME/Bilstein
JBA Gen4.5
IRO 3 Linked
245/75 Duratracs

So the bilsteins for front struts work ok wth ome coils?

Yes Bilstiens will work with OME springs although the OME front shocks are valved to work in conjuction with the springs
But about half the lifts we have done here at my place were the Bilstien/ OME setups

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited