These are RRO upper plates I ordered a while back on a bet.....I won the bet, but finally got them in and look, suprised they dont fit the shock mount. (Sarcasm)

First the holes dont even line up, the holes arnt the right size and what heck is up with the holes? Those aint circles!!!

See and this is why you dont buy from ROCKY ROAD OUTFITTERS. if they cant get top plates right, how in the world can they get upper arms or anything else to fit.

Tomorrow will be the test for the extended bumpstops, which also have ovals as bolt holes!!!

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Yep, been like that for years yet people still buy from them
You should of said something, I have had a set of them laying around for 10 years, they came with my used ARB back in 2005.
Its what the guy was running when he had so many UCA/ shock failures

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

When I bought a strut mounting kit from NAPA, my JBA top plates did not fit these. They fit great on OEM strut mounts though, looks like you have OEM strut mounts in the image though. The NAPA strut mount fit great into the Jeep though...

http://www.napaonline.com/Catalog/CatalogItemDetail.aspx/Strut-Mounting-Kit-Left-Front/_/R-NS_905903_0484386783

Rocky Road extended bump stops fit great on my JBA A-Arms. Only issue is longer bolts are needed.

_________________
Phil
2005 131k 3.7 Gasser (Lifted-CRD Springs, 4.10 Gears, F+R DTT, Teraflex 2wd Low, Skidrow/Mopar Skids, Rock Lizard Super Skinks, Goodyear Wrangler Authority 31x10.5-15)
2012 Triumph Tiger (TKC 80 Front Tire Heidnau K60 Rear, Crash Bars, Skid Plate, Bark Busters, Pelican Case Top Box)

I have three sets of factory spring assemblies, 02, 05 crd and KK. They didnt fit on any of them.

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

So after a quick call to RRO.....they said they use a plasma cutter to cut out the brackets, about the holes being oval and off, they told me their shop dosent clean up the holes and thats up to the customer to do.

So the customer needs to drill out the holes and fit them up. Dosent seem like thats a great business plan to me.

Im just glad it wasnt my money that they took and that i won $50 by dealing with this bull ship. Time to grab a beer and throw these RRO parts in the scrap pile

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

So they take the time to powder coat the brackets and ship them out so the customer can then drill out the holes and.........
Oh never mind its ridiculous crap

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

That is the crappiest powder coat job I have ever seen. Sure thats not 50 coats of Krylon

_________________
2005 Jeep Liberty Sport
3.7L with open diffs, 3 inch Johnny Cash lift plus a bunch of the mods you can find on here.

Its a real bad powdercoating job. Also the holes are now 9/16" and they still dont fit........imagine that lol

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Thanks for the heads up - I didn't know about the rep for this company.

I bought my strut plates from JBA - they fit like a glove on the Moog (I think?) replacements on both sides with a light tap or two. The finish appeared to be of much higher quality also.

_________________
03 KJ Sport - black
4xGuard engine skid
235/85/16 Hankook ATM
OME 927/Ironman, 1/4" plate, 3-ring clevis 21.5"
OME 948/OME + 2 Iso's Rear 22"
JBA UCAs
Bumper and winch
2x5 rockers/steps
Dynomax Ultra-Flo Welded
Custom pinstriping
Custom rear interior shelf
SS drop table
Soon:
Rear bumper
WRX seats
All the skids