| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Going to 20in rims http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=83182 |
Page 1 of 1 |
| Author: | Explicit_03 [ Sat Oct 03, 2015 9:50 pm ] |
| Post subject: | Going to 20in rims |
I wanted to see what size offset I need I was looking at -12 then some postive what's the most I can do without rubbing. No lift. Was gonna run 245 50 20 thanks guys. Sent from my SM-N910V using Tapatalk |
|
| Author: | Explicit_03 [ Sat Oct 03, 2015 9:52 pm ] |
| Post subject: | Re: Going to 20in rims |
Sorry 2011 liberty Sent from my SM-N910V using Tapatalk |
|
| Author: | tommudd [ Sun Oct 04, 2015 6:55 am ] |
| Post subject: | Re: Going to 20in rims |
First 20 inch wheels with low profile tires are going to ride like a road wagon next unlifted you will have to stay with exact stock wheel width 7 inches and back spacing of 5 inches next finding a good tire , well its just a bad idea |
|
| Author: | Explicit_03 [ Sun Oct 04, 2015 3:40 pm ] |
| Post subject: | Re: Going to 20in rims |
Well the liberty jets run 245 50 20 along with a lot of other cars. That's the tire size I was gonna go with. But I read somewhere you can run up to 10in wide rim Sent from my SM-N910V using Tapatalk |
|
| Author: | PALiftedKK [ Sun Oct 04, 2015 4:25 pm ] |
| Post subject: | Re: Going to 20in rims |
your going from 16s to 20s... that's a whole lot less rubber... why exactly do you want to downgrade (upgrade) to 20s? |
|
| Author: | tommudd [ Sun Oct 04, 2015 5:00 pm ] |
| Post subject: | Re: Going to 20in rims |
Explicit_03 wrote: Well the liberty jets run 245 50 20 along with a lot of other cars. That's the tire size I was gonna go with. But I read somewhere you can run up to 10in wide rim Sent from my SM-N910V using Tapatalk  10 inch wide wheels? NO way , unless you only drive striaghtYes I know the Jets came with 20s but do you also know how many were switched out soon after for a better ride ? |
|
| Author: | gottorque [ Mon Oct 05, 2015 10:24 am ] |
| Post subject: | Re: Going to 20in rims |
If he likes the look and can deal with the marginal ride, let him do it. Not everyone wheels or has intentions to go offroad so more power too him. |
|
| Author: | tommudd [ Mon Oct 05, 2015 3:02 pm ] |
| Post subject: | Re: Going to 20in rims |
gottorque wrote: If he likes the look and can deal with the marginal ride, let him do it. Not everyone wheels or has intentions to go offroad so more power too him. Agree to a point but 10 inch wide wheels are not doable even lifted and have heard too many complain about the ride after going to larger wheels on the KJ and KKs then reversing and going back to 16s But sure its his nickle I don't GARA  just trying............. |
|
| Author: | tjkj2002 [ Mon Oct 05, 2015 6:56 pm ] |
| Post subject: | Re: Going to 20in rims |
Explicit_03 wrote: Well the liberty jets run 245 50 20 along with a lot of other cars. That's the tire size I was gonna go with. But I read somewhere you can run up to 10in wide rim Sent from my SM-N910V using Tapatalk Simple solution................. Buy the 20" jet wheels and use that stock tire size,no need to worry about anything that way. |
|
| Author: | Explicit_03 [ Wed Oct 07, 2015 8:09 pm ] |
| Post subject: | Re: Going to 20in rims |
So if I stayed with 16s cause it has been a thought (had low pros on my other cars didn't like so much) will a -12mm off set work on the liberty Sent from my SM-N910V using Tapatalk |
|
| Author: | Devilmonkey [ Tue Nov 10, 2015 11:22 am ] |
| Post subject: | Re: Going to 20in rims |
post a pic when you get it done .... we'll need something to laugh at later |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|