I took the grab-handle/cover off of the drivers side windshield pillar to help figure out a water leak a few days ago, and found the cord.

It's attached with a flat metal hook about half way up the pillar, and runs up the underside of the pillar into the overhead area.

What is it, and how delicate is it?

Thanks for any answers and insight.

_________________
'06 Liberty Limited CRD.
149K miles.
- Timing belt done.
- Weeks Kit Stage 1.
- Weeks Kit Stage 2.
- JBA 2.5 inch Silver kit and UCAs installed at 125K miles.
- Weeks supplied Samco Intercooler Hoses and clamps.

Waiting for time, limber fingers, and good weather to do my HDS Model 001 Thermostat unit swap.

air bag curtain. pull it if you want to severely injure yourself.

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15
ATS42rle -> Jasper for the long-term win!

Thanks for that.

I never thought they had ripcords.
I thought they used electric-type strain gauges.

_________________
'06 Liberty Limited CRD.
149K miles.
- Timing belt done.
- Weeks Kit Stage 1.
- Weeks Kit Stage 2.
- JBA 2.5 inch Silver kit and UCAs installed at 125K miles.
- Weeks supplied Samco Intercooler Hoses and clamps.

Waiting for time, limber fingers, and good weather to do my HDS Model 001 Thermostat unit swap.

My 2002 Export 2.5 CRD has a flat cable in that position for the curtain airbags....strange to have a pull cord for airbags?

_________________
2002 Export CRD 2.5 Sport