LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Jeep Liberty, 2002, 3.7L - oil pan removal
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=83708		 Page 1 of 1
Author:  kk3dln [ Tue Dec 22, 2015 2:40 pm ]
Post subject:  Jeep Liberty, 2002, 3.7L - oil pan removal
Help! can I raise the engine up enough by loosening the motor mounts to get the oil pan down. Has anyone ever done this?
Author:  JeepMorrison [ Wed Dec 23, 2015 12:48 am ]
Post subject:  Re: Jeep Liberty, 2002, 3.7L - oil pan removal
kk3dln wrote:
Help! can I raise the engine up enough by loosening the motor mounts to get the oil pan down. Has anyone ever done this?

I swear I have seen this question before......smh

Sent from my SM-N900P using Tapatalk
Author:  tommudd [ Wed Dec 23, 2015 6:52 am ]
Post subject:  Re: Jeep Liberty, 2002, 3.7L - oil pan removal
JeepMorrison wrote:
kk3dln wrote:
Help! can I raise the engine up enough by loosening the motor mounts to get the oil pan down. Has anyone ever done this?

I swear I have seen this question before......smh

Sent from my SM-N900P using Tapatalk


somewhere but :? :?
Author:  JeepMorrison [ Wed Dec 23, 2015 11:59 pm ]
Post subject:  Re: Jeep Liberty, 2002, 3.7L - oil pan removal
You dont even have to raise the engine to remove the pan.

Just drail all of the oil, unbolt it, but leave 4 bolts in part way. Then take a plasma cutter to the pan.

Sent from my SM-N900P using Tapatalk
Author:  kk3dln [ Thu Dec 24, 2015 2:07 pm ]
Post subject:  Re: Jeep Liberty, 2002, 3.7L - oil pan removal
I have to replace a piston in the engine, i do not want to destroy it. it sounds like someone wants to be funny.
Author:  flash7210 [ Thu Dec 24, 2015 2:21 pm ]
Post subject:  Re: Jeep Liberty, 2002, 3.7L - oil pan removal
If you have to replace a piston, then just plan on pulling the whole motor out.
Will make the job a lot easier.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/