hello! this may be a dumb question but the next mod im saving up for is a snorkel. Im wondering since I converted my air intake into a v6 one (old one cracked junkyard has many v6s) should I get the snorkel for the gas liberty's? Thanks!

_________________
'05 kj CRD Limited 160k on body 85k on engine, 2.5" lift, JBA arms, OME springs, Bilstein 5100 front, skyjacker blackmax rear, Spider spacers, toyo a/t 245 75s, all suspension and steering components new, sasquatch turbo, EGR delete, 5v bosch plugs, @Libby.PDX on Instagram!

Hmm, Which models are you considering?

I don't think it matters. The snorkels I've seen require you to cut a big hole in the right front fender and the air box. That side of the air box is the same for both gassers and CRD's.

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.

Thanks for the input, that’s what I figured too but safari snorkel and alibaba both have different models for both gas and crd Libbys. I wonder what the difference is. I’m prolly leaning towards alibaba I got quoted $300 for one, it’s a piece of plastic might as well save $200 they claim it’s made from LLPDE.

_________________
'05 kj CRD Limited 160k on body 85k on engine, 2.5" lift, JBA arms, OME springs, Bilstein 5100 front, skyjacker blackmax rear, Spider spacers, toyo a/t 245 75s, all suspension and steering components new, sasquatch turbo, EGR delete, 5v bosch plugs, @Libby.PDX on Instagram!

I did some research before I got one. Worked out that one for a Mitsubishi diesel would fit. They call them Pajero's in Australia. It was about 1/4 the price of a Safari KJ one. I was able to plumb it to the inlet of the diesel air cleaner. Cutting the hole is a bit of a worry. Very gently with a hole saw on a drill.
It needs to have a very long horizontal section. That limits your choices.

_________________
Australian KJ CRD 2006

I've been running EGR delete on my jeep and it's been solid. For full DPF/exhaust cleanup I went with a kit from thedpfdeletekits.com, fits these engines well and really wakes them up. Highly recommend checking them out if you're modding

thedpfdeletekits.com do not list any EGR delete kits for the 2005 or 2006 Jeep CRD's.
and
Jeep Liberty diesels DO NOT have any DPF on them!
Your post is very misleading!

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve