THE OHIO CHAT ROOM!!!

tommudd · **Posted:** Fri Apr 12, 2013 8:38 am

On my house I have to physically put the key in the lock each time to lock it so no way can I lock myself out which is good.
Now the garage :roll:

we won't even go there, one of the reasons when I'm working in the garage my keys hang on the man door
The Jeep, well two times was enough for me to hide a key. I locked myself out once clear back in the woods down home :banghead:

so hike out call the locksmith who is 50 miles away, wait for him, then have to have him hike back into the woods with me :roll:

you can imagine the way that afternoon went ............................

Marlon_JBT · **Posted:** Fri Apr 12, 2013 8:56 am

TwoBobsKJ wrote:

Marlon_JBT wrote:

Not the first time I've done it. Has to be around the 4th or 5th. And we won't get started on how many times I've locked myself out of my Jeep...

Marlon, all four of us in my family carry extra keys for the house and our cars in our wallet. We've done the same thing umpteen times! :banghead:

Bob

I have an extra key for the Jeep in my wallet already. Mmmmm, maybe I SHOULD put an extra key in my wallet.

TAHOE · **Posted:** Fri Apr 12, 2013 9:28 am

Yep, every vehicle has extra key hid on it somewhere, extra set of house keys hit outside of house too.

John3:17 · **Posted:** Fri Apr 12, 2013 2:15 pm

Marlon_JBT wrote:

TwoBobsKJ wrote:

Marlon_JBT wrote:

Not the first time I've done it. Has to be around the 4th or 5th. And we won't get started on how many times I've locked myself out of my Jeep...

Marlon, all four of us in my family carry extra keys for the house and our cars in our wallet. We've done the same thing umpteen times! :banghead:

Bob

I have an extra key for the Jeep in my wallet already. Mmmmm, maybe I SHOULD put an extra key in my wallet.

And....... You have never forgotten your wallet???

Marlon_JBT · **Posted:** Fri Apr 12, 2013 4:02 pm

I have never forgotten my wallet. It's fallen on the side of the seat a few times and I thought I lost it but forgotten? Nope, not at all.

Ted15 · **Posted:** Fri Apr 12, 2013 5:04 pm

Thanks for the offer to call Bob but I don't think it'll do any good. Here's the reply from Chrysler
Dear Ted:

Thank you for your recent email, although it does not contain any
information that would cause a change in the previous decision. Your
vehicle will need to be restored back to factory specifications before
the dealership will agree to diagnose the concern

Any future communication related to this issue will be retained in
corporate records.

If at some future date, we can be of assistance to you in some other
area, please let us know.

Thanks again for your email.

Sincerely,

Crystal

Customer Service Representative
Jeep Customer Assistance Center

For any future communications related to this email, please refer to the
following information:

teckman02 · **Posted:** Fri Apr 12, 2013 5:14 pm

Marlon_JBT wrote:

Marlon doesn't cut anything.

Marlin might though...

Marlon does stupid things. Nothing smart. Example you ask?

Lock himself out of his house...

hey marlin might want to look into a digital deadbolt lock i have one and it works great best thing that i have ever bought for the house

teckman02 · **Posted:** Fri Apr 12, 2013 5:17 pm

Ted15 wrote:

Thanks for the offer to call Bob but I don't think it'll do any good. Here's the reply from Chrysler
Dear Ted:

Thank you for your recent email, although it does not contain any
information that would cause a change in the previous decision. Your
vehicle will need to be restored back to factory specifications before
the dealership will agree to diagnose the concern

Any future communication related to this issue will be retained in
corporate records.

If at some future date, we can be of assistance to you in some other
area, please let us know.

Thanks again for your email.

Sincerely,

Crystal

Customer Service Representative
Jeep Customer Assistance Center

For any future communications related to this email, please refer to the
following information:

sounds like BS to me

tommudd · **Posted:** Fri Apr 12, 2013 5:22 pm

Ted15 wrote:

Thanks for the offer to call Bob but I don't think it'll do any good. Here's the reply from Chrysler
Dear Ted:

Thank you for your recent email, although it does not contain any
information that would cause a change in the previous decision. Your
vehicle will need to be restored back to factory specifications before
the dealership will agree to diagnose the concern

Any future communication related to this issue will be retained in
corporate records.

If at some future date, we can be of assistance to you in some other
area, please let us know.

Thanks again for your email.

Sincerely,

Crystal

Customer Service Representative
Jeep Customer Assistance Center

For any future communications related to this email, please refer to the
following information:

Come on now,
thats like a woman telling a guy, "its not you, it's me"
wait it was a woman telling you that :roll:

OK time to tear it apart , find the problem, show them it was something that they should of repaired and bug the crap out of them for not doing the right thing.
Dear sweet Crystal, wonder if that "canned" answer was on page 4 or 5 of the denial book

Ted15 · **Posted:** Fri Apr 12, 2013 7:09 pm

NEVER NEVER NEVER buy ANYTHING from Fred Martin. This isn't uncommon. I just wish I'd realized that tiger didn't change it's strips. This crap really hurt them years ago and it looks like they're up to their old tricks. I wonder if it had anything to do with Fiat taking over.

KJWildman · **Posted:** Fri Apr 12, 2013 8:16 pm

I HAVE A WHOLE WEEKEND OFF!!!!! 8-)

Sure wish I knew someone with a couple tools that could help me for a while with the XJ. ;-)

I really need to find the noise in my front end. Also have to adjust the xfer case linkage. If there would be time maybe I could mount my a-pillar light brackets. Oh and I bought new LED headlights that I need to install for my midnight runs looking for deer too! :mrgreen:

Hmmmmmm wish I knew someone like that! (hint, hint)

Sent from my SCH-M828C using Tapatalk 2

tommudd · **Posted:** Sat Apr 13, 2013 12:28 am

Sounds like you're going to have a full day of work Larry
Let me know where you'll be and if I get back from my trip in time I'll swing by :wink:

Springs here it seems :pepper:

I just looked at my calendar and every weekend through May 25th have things going on.

Anyone want to try and do a M&G in May sometime ?????????
I might be able to flip some things around if we do

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

KJWildman wrote:

I HAVE A WHOLE WEEKEND OFF!!!!! 8-)

Sure wish I knew someone with a couple tools that could help me for a while with the XJ. ;-)

I really need to find the noise in my front end. Also have to adjust the xfer case linkage. If there would be time maybe I could mount my a-pillar light brackets. Oh and I bought new LED headlights that I need to install for my midnight runs looking for deer too! :mrgreen:

Hmmmmmm wish I knew someone like that! (hint, hint)

Sent from my SCH-M828C using Tapatalk 2

There's my fuzzy buddy :jester:

Got tools but got no time for wrenching :banghead:

Busyyyyyyyyyy at swingin a hammer this weekend, got holes to fill with doors this weekend :pepper:

tommudd wrote:

Sounds like you're going to have a full day of work Larry
Let me know where you'll be and if I get back from my trip in time I'll swing by :wink:

Springs here it seems :pepper:

I just looked at my calendar and every weekend through May 25th have things going on.

Anyone want to try and do a M&G in May sometime ?????????
I might be able to flip some things around if we do

Sounds like a good time to take a lil break unless I have ya busy putting in windows :goink:

Fleeing town again ? :shock:

Must be a hot Amish chick oh wait nope flee markets and Sat night bingo in full swing again :jester:

TwoBobsKJ · **Joined:** Fri May 11, 2012 8:03 pm **Posts:** 463

tommudd wrote:

Sounds like you're going to have a full day of work Larry
Let me know where you'll be and if I get back from my trip in time I'll swing by :wink:

Springs here it seems :pepper:

I just looked at my calendar and every weekend through May 25th have things going on.

Anyone want to try and do a M&G in May sometime ?????????
I might be able to flip some things around if we do

Count me in, Tom. Saturday May 11th would work for me. My wife is going to a wedding that I'm not obligated to attend :BANANA:

Bob

TwoBobsKJ · **Joined:** Fri May 11, 2012 8:03 pm **Posts:** 463

Guys, can you help me out here? I want to replace the U-joints in the rear driveshaft but when I look up the parts on NAPA's website it shows two different sizes. One is 3.22 inches and the other is 3.62".

Which one is the correct size? Or is the one at the axle end one size and at the transfer case/trans end another size? Is one size for the 45RFE and the other size for the 42RLE tranny?

I feel so dumb... :furious:

Here's a link to the page on NAPA's website. The two different size options are shown on the far-left column with 16 choices overall:

NAPA U-Joint Options

Bob

tommudd · **Posted:** Sat Apr 13, 2013 3:25 pm

TwoBobsKJ wrote:

Guys, can you help me out here? I want to replace the U-joints in the rear driveshaft but when I look up the parts on NAPA's website it shows two different sizes. One is 3.22 inches and the other is 3.62".

Which one is the correct size? Or is the one at the axle end one size and at the transfer case/trans end another size? Is one size for the 45RFE and the other size for the 42RLE tranny?

I feel so dumb... :furious:

Here's a link to the page on NAPA's website. The two different size options are shown on the far-left column with 16 choices overall:

NAPA U-Joint Options

Bob

PM'd ya

tommudd · **Posted:** Sat Apr 13, 2013 3:27 pm

TwoBobsKJ wrote:

tommudd wrote:

Sounds like you're going to have a full day of work Larry
Let me know where you'll be and if I get back from my trip in time I'll swing by :wink:

Springs here it seems :pepper:

I just looked at my calendar and every weekend through May 25th have things going on.

Anyone want to try and do a M&G in May sometime ?????????
I might be able to flip some things around if we do

Count me in, Tom. Saturday May 11th would work for me. My wife is going to a wedding that I'm not obligated to attend :BANANA:

Bob

11th won't work for me, weekend already scheduled
plus
Mothers day weekend

Ted15 · **Posted:** Sat Apr 13, 2013 9:45 pm

I'm out in California right now, San Diego area and darn if it's as cloudy as it was at home when I left. Bummer. At least it isn't as cold.

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Front door in and trimmed. Time for primer and paint today before I slap up the storm door :pepper:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Got the front door filled, sanded and primed. Made the jam extensions for the interior of rear french doors and installed. Went to hardware store for stain and trim, got side tracked picking up 3 more paver molds from Quikrete, grabbing 28 boxwood's and 6 arborvitae's at 5-6 feet tall each. Does someone want to know how to load their KJ? :shock:

Man the things I get myself in to.
Have to go tomorrow to grab my glass block windows and remember my interior trim and stain :shock:

THE OHIO CHAT ROOM!!!

Who is online