THE OHIO CHAT ROOM!!!

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Good time for sure even if all I did was offering my morel support. Heck Chris drove all the way from down south and used all of his co2, I drank most of his top shelf and you worked your butt off in your own garage,! What's new, I know? Good Friends are almost as hard to find as good mechanics :wink:

PPPPPFFFFFTTTTTTTT ( to quot Chris :ROTFL:

) Larry used some lame excuse like he had to work or something :ROTFL:

tommudd · **Posted:** Fri Mar 18, 2011 11:20 pm

BugginKJ wrote:

:ROTFL: PPPPPFFFFFTTTTTTTT ( to quot Chris :ROTFL:

) Larry used some lame excuse like he had to work or something :ROTFL:

Larry did call and say " I should of stopped over at 7
yeah right, he drove by and saw we were still here and just went home :goink:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

tommudd wrote:

BugginKJ wrote:

:ROTFL: PPPPPFFFFFTTTTTTTT ( to quot Chris :ROTFL:

) Larry used some lame excuse like he had to work or something :ROTFL:

Larry did call and say " I should of stopped over at 7
yeah right, he drove by and saw we were still here and just went home :goink:

I thought I smelled sumtin funny :jester:

blackwidowkj06 · **Posted:** Fri Mar 18, 2011 11:40 pm

Liking the new lifted OH KJ :mrgreen:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Now if only I could get Dad to break away from some of his bank roll for his beloved stone white Liberty :ROTFL:

blackwidowkj06 · **Posted:** Fri Mar 18, 2011 11:57 pm

Didn't want to but guess I'll have to...

How in the world did you all get (for those who did) get the rear seats out? I mean I gave all I could to loosen those bottom bolts (ones anchoring the rear seats to the floor) I actually broke a tool trying :oops:

No, I'm not that strong either. It wasn't a Craftsman :lol:

I know you all are 1000x stronger than I...so it would be easier
But what I'm really getting at is how do you get the rear seats out? I'm 50% there and only have the floot bolts and the bolts where the seat belt strap is...Tool sizes and specific tool suggestions would help. I'm counting on a friend to come over after 8am to help before he leaves with his family for Nashville, but I DOUBT that will happen.

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

blackwidowkj06 wrote:

Didn't want to but guess I'll have to...

How in the world did you all get (for those who did) get the rear seats out? I mean I gave all I could to loosen those bottom bolts (ones anchoring the rear seats to the floor) I actually broke a tool trying :oops:

No, I'm not that strong either. It wasn't a Craftsman :lol:

I know you all are 1000x stronger than I...so it would be easier
But what I'm really getting at is how do you get the rear seats out? I'm 50% there and only have the floot bolts and the bolts where the seat belt strap is...Tool sizes and specific tool suggestions would help. I'm counting on a friend to come over after 8am to help before he leaves with his family for Nashville, but I DOUBT that will happen.

It's a little too dark outside right now and I have never taken mine out but I can look tomorrow if he doesn't help ya to let ya know....
I know someone else here has just recently redone his seats but his name eludes me right now :ROTFL:

blackwidowkj06 · **Posted:** Sat Mar 19, 2011 12:06 am

BugginKJ wrote:

blackwidowkj06 wrote:

Didn't want to but guess I'll have to...

How in the world did you all get (for those who did) get the rear seats out? I mean I gave all I could to loosen those bottom bolts (ones anchoring the rear seats to the floor) I actually broke a tool trying :oops:

No, I'm not that strong either. It wasn't a Craftsman :lol:

I know you all are 1000x stronger than I...so it would be easier
But what I'm really getting at is how do you get the rear seats out? I'm 50% there and only have the floot bolts and the bolts where the seat belt strap is...Tool sizes and specific tool suggestions would help. I'm counting on a friend to come over after 8am to help before he leaves with his family for Nashville, but I DOUBT that will happen.

It's a little too dark outside right now and I have never taken mine out but I can look tomorrow if he doesn't help ya to let ya know....
I know someone else here has just recently redone his seats but his name eludes me right now :ROTFL:

Yeah that would be great! Might need some advice on what tools to buy from Lowes as well since I'm breaking stuff. Actually broke a factory bolt clean in half trying to remove my driver door last year :shock:

After that, I gave up. But will try again and HOPEFULLY be successful so I can show my KJ off at Somernites Cruise :wink:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Why may I ask are ya trying to take out your back seat?

blackwidowkj06 · **Posted:** Sat Mar 19, 2011 12:14 am

BugginKJ wrote:

Why may I ask are ya trying to take out your back seat?

Well my good sir...

I'm going to eventually build my own rear seat delete :mrgreen:

Plus I rarely use the back seat, so why not throw it out? Oh yeah, there's parts of carpet up under the rear seat that needs to come out. I literally tore the carpet out of my Jeep almost a month ago. Need to bedline the floor and make something to cover those wires up. OR buy vinyl flooring :juggle:

It was 80F today here. I was roasting and got a taste of whats to come this summer. The joys of roasting in a black Jeep

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Well don't throw it out, ya might want it back someday.
There are several ways to cover the wiring, my first thought would be hd plastic loom covering secured to the flooring.
80 degrees, dang I would have had my thong on :ROTFL:

blackwidowkj06 · **Posted:** Sat Mar 19, 2011 12:28 am

BugginKJ wrote:

Well don't throw it out, ya might want it back someday.
There are several ways to cover the wiring, my first thought would be hd plastic loom covering secured to the flooring.
80 degrees, dang I would have had my thong on :ROTFL:

I didn't mean literally throw the rear seats out! :ROTFL:

And I'm still pondering on how to cover the wires...I have for like a month :shock:

but your idea sounds tempting.

Yes it was 80 degrees here...I'm telling you all...KY weather is VERY unpredictable. I wouldn't be surprised if it started snowing next week :ROTFL:

Those attending ECS be prepared!!!

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

blackwidowkj06 wrote:

BugginKJ wrote:

Well don't throw it out, ya might want it back someday.
There are several ways to cover the wiring, my first thought would be hd plastic loom covering secured to the flooring.
80 degrees, dang I would have had my thong on :ROTFL:

I didn't mean literally throw the rear seats out! :ROTFL:

And I'm still pondering on how to cover the wires...I have for like a month :shock:

but your idea sounds tempting.

Yes it was 80 degrees here...I'm telling you all...KY weather is VERY unpredictable. I wouldn't be surprised if it started snowing next week :ROTFL:

Those attending ECS be prepared!!!

Does that mean the Rev. should bring his thong also? :ROTFL:

blackwidowkj06 · **Posted:** Sat Mar 19, 2011 12:40 am

BugginKJ wrote:

blackwidowkj06 wrote:

BugginKJ wrote:

Well don't throw it out, ya might want it back someday.
There are several ways to cover the wiring, my first thought would be hd plastic loom covering secured to the flooring.
80 degrees, dang I would have had my thong on :ROTFL:

I didn't mean literally throw the rear seats out! :ROTFL:

And I'm still pondering on how to cover the wires...I have for like a month :shock:

but your idea sounds tempting.

Yes it was 80 degrees here...I'm telling you all...KY weather is VERY unpredictable. I wouldn't be surprised if it started snowing next week :ROTFL:

Those attending ECS be prepared!!!

Does that mean the Rev. should bring his thong also? :ROTFL:

Well lets see...errr
Many people would still like to have their vision and keep their supper down...sooo...... :juggle:

I wouldn't be suprised if it was still in the low 80's when we all hit BlackMountain for ECS :JEEPIN:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Well then you have never seen us line dance before in them utlra sexy things :goink:

blackwidowkj06 · **Posted:** Sat Mar 19, 2011 12:46 am

yellocoyote wrote:

BugginKJ wrote:

Does that mean the Rev. should bring his thong also? :ROTFL:

Dude.

Seriously.

You need to stop that now. :shock:

X2 please

Already feeling queezy and fore see nightmares... :ROTFL:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

meh_kick · **Posted:** Sat Mar 19, 2011 7:56 am

blackwidowkj06 wrote:

BugginKJ wrote:

blackwidowkj06 wrote:

Didn't want to but guess I'll have to...

How in the world did you all get (for those who did) get the rear seats out? I mean I gave all I could to loosen those bottom bolts (ones anchoring the rear seats to the floor) I actually broke a tool trying :oops:

No, I'm not that strong either. It wasn't a Craftsman :lol:

I know you all are 1000x stronger than I...so it would be easier
But what I'm really getting at is how do you get the rear seats out? I'm 50% there and only have the floot bolts and the bolts where the seat belt strap is...Tool sizes and specific tool suggestions would help. I'm counting on a friend to come over after 8am to help before he leaves with his family for Nashville, but I DOUBT that will happen.

It's a little too dark outside right now and I have never taken mine out but I can look tomorrow if he doesn't help ya to let ya know....
I know someone else here has just recently redone his seats but his name eludes me right now :ROTFL:

A couple of the large nuts you remove (27mm?) are actually attached to studs that run through the floor. You are removing the whole thing. They get corroded on the other side so you may have to hit them with pb blaster from under the jeep. I did that and still used 1/2 inch deep well impact sockets with an 18" bar to break mine free.

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Lift and doing a new bumper that I actually will like this time around has been on my mind :dizzy:

tommudd · **Posted:** Sat Mar 19, 2011 9:45 am

BugginKJ wrote:

Lift and doing a new bumper that I actually will like this time around has been on my mind :dizzy:

So how many sketches did you do last night after you and your wife went to bed? :ROTFL:

THE OHIO CHAT ROOM!!!

Who is online