THE OHIO CHAT ROOM!!!

tommudd · **Posted:** Mon May 16, 2011 4:56 pm

Thats what our IT guy sai this AM !!!! :ROTFL:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Did someone say :5SHOTS:

? Double it for me and hold the dilution rocks :jester:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

This Sunday after church I am taking the family to the African safari wildlife park in Port Clinton. Not quite the safari Tom's company could send the family on but as close as my pocket book will ever get for the family :jester:

Then going to go out for a nice lunch/dinner afterwards, it should be good family fun :BANANA:

KJWildman · **Posted:** Tue May 17, 2011 9:39 am

Stopped at HF this morning on the way home and spent $70!

Got a welding cart for the MIG and gas bottle, a new roll of welding wire and a couple other small things! :BANANA:

Then stopped at O'Reilly's and spent another $65. Now I'm headed to the garage till about 1:00. :BANANA:

Megalos · **Posted:** Tue May 17, 2011 10:01 am

Oh look! Its cold and raining outside...and will be all week! :banghead:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Megalos wrote:

Oh look! Its cold and raining outside...and will be all week! :banghead:

You must have a cloud following you! It's sunny, not a cloud in the sky and about 75 right now in Toledo!

:goink:

YA RIGHT, I WISH!!!!!!!!!!! :banghead:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

KJWildman wrote:

Stopped at HF this morning on the way home and spent $70!

Got a welding cart for the MIG and gas bottle, a new roll of welding wire and a couple other small things! :BANANA:

Then stopped at O'Reilly's and spent another $65. Now I'm headed to the garage till about 1:00. :BANANA:

Ya know Larry I just may have to use that little sucker REAL SOON! Oh and buy some torches also, Tom said so :jester:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Thought for the moment...................
I wonder who it is that is going to troll today that doesn't have "anything to do with LOST anymore" and not participate in any sort of conversation. It must be an Ohio thing :ROTFL:

Or is a welcome back in order since you can click on their names and see when they have been here! :ROTFL:

Don't worry "boys" nuttin is said about you, atleast here but I can't speak for pm's or around the ole campfire :wink:

RayRayLRdisco · **Posted:** Tue May 17, 2011 6:11 pm

$447, and a couple hours, and my front left wheel hub/bearing is replaced on my Rover

blackwidowkj06 · **Posted:** Tue May 17, 2011 7:05 pm

Getting ready to make a phone call to a KJ owner and hopefully recruit him to LOST!

Thinking about asking if he will trade his stock suspension parts+stock tires & wheels...to my daystar lift+renny wheels & km2s. It will save me $$$ in gas this summer, plus I'm going OME in September...sooo :juggle:

tommudd · **Posted:** Tue May 17, 2011 8:23 pm

Megalos wrote:

Oh look! Its cold and raining outside...and will be all week! :banghead:

all week say its not so!!!

Its suppose to start drying up on Friday and be nice Saturday and Sunday

hopefully for what I have planned it would be nice to be dry for a change!

tommudd · **Posted:** Tue May 17, 2011 9:15 pm

Had a visitor

KJWildman · **Posted:** Tue May 17, 2011 9:30 pm

Gettin ready for work, but wanted to jump in and say HI!!

Just played in the garage today. I need to get a new tip for the MIG. This one's burned up ......now! :roll:

I did try to finish getting the acccesories ( i.e. ... alternator/ PS pump ) and brackets on the engine so I knew in my mind where they went and that I had the bolts I needed. I don't!! Guess I need to get just a few more. Oh well, on to work and do some more tomorrow. As soon as I can ( no rain 0) I'll drill a couple more holes and then I'll be ready to drop that engine in there!!! :BANANA:

See Ya!!!!!

tommudd · **Posted:** Tue May 17, 2011 9:56 pm

MORE BOLTS Larry?????

Dang I would think by now you'd have more than enough bolts!

I think we need to just raid Tractor Supply or better yet Summit Racing and have a whole load of bolts at your finger tips!
:ROTFL:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

$447, and a couple hours, and my front left wheel hub/bearing is replaced on my Rover
:shock:

Holy smokes, those gold plated hubs must be nice! :jester:

Good to hear it's movin along Larry, I noticed your ignoring Tom's orders :shock:

Tom I should bring my squirrel song on over for ya to hear :ROTFL:

Marlon_JBT · **Posted:** Wed May 18, 2011 3:42 am

tommudd wrote:

hopefully for what I have planned it would be nice to be dry for a change!

I just hope I do not have to work this Saturday!

tommudd · **Posted:** Wed May 18, 2011 8:05 am

Could always make a visit on Sunday :lol:

TAHOE · **Posted:** Wed May 18, 2011 8:58 am

Anyone had to replace front rotors? Gotta do front brakes on Libby, torn between getting them turned or just replacing, not sure how much meat is left, may have to get new anyway. They only have 65K so I should be able to turn them.

BBrrrrr stupid cold wet weather. Grass in the field is waist high, I'm gonna have to pay someone now to bush hog it :banghead:

blackwidowkj06 · **Posted:** Wed May 18, 2011 9:47 am

TAHOE wrote:

Anyone had to replace front rotors? Gotta do front brakes on Libby, torn between getting them turned or just replacing, not sure how much meat is left, may have to get new anyway. They only have 65K so I should be able to turn them.

BBrrrrr stupid cold wet weather. Grass in the field is waist high, I'm gonna have to pay someone now to bush hog it :banghead:

I was going to replace all my rotors in September cause they'll have around 70,000 (maybe a little more). Is there certains brands that work better for the Liberty? With the OME lift+clevis lift, is there any way you can extend the brake lines a little or do I have to buy a longer brake hose kit from JBA tailored to a lift of that size?

tommudd · **Posted:** Wed May 18, 2011 9:48 am

Best to replace them really Tahoe
There is not much meat there to begin with to turn them
Heard of a few that turned theirs but had warping later down the road
Not sure what new ones cost haven't priced them lately
I threw new ones on mine at I think 150,000 or so, old ones still did OK but had a set of Mopar rotors and pads laying there so thought what the heck

THE OHIO CHAT ROOM!!!

Who is online