THE OHIO CHAT ROOM!!!

Ted15 · **Posted:** Sat Apr 21, 2012 5:07 pm

Nice. Do they make a lost Ohio?

cgass · **Posted:** Sat Apr 21, 2012 5:32 pm

Ted15 wrote:

Nice. Do they make a lost Ohio?

You can customize them to say whatever they want and you can choose the background. http://www.pixeldecals.com/shop/LOST-Jeeps_Customizable-Decal

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Marlon_JBT wrote:

I'm OME springged

on all 4 corners.

Hey I could of answered that :ROTFL:

Ted15 · **Posted:** Sat Apr 21, 2012 6:13 pm

I think I'm going to do that this year, I think my springs are starting to sag a little. I just turned 20,000 yesterday, that's just about where I was told it would happen. At least they're consistant if nothing else.

KJWildman · **Posted:** Sun Apr 22, 2012 12:24 am

Had to work again today! :evil:

But the money's good on Saturdays! :SOMBRERO:

Then came home and drove the XJ over to the Northwest Ohio Crawlers M&G a few miles up the road. There was a good turnout, probably around 30 vehicles. Including a Bronco II on 32's, a Durango with 4" of lift on 33" TSL's and an SFA KJ on 35's!! Realized after that I didn't get a pic of the Durango! :banghead:

It actually looked pretty good with a lift! Hart and Tom, you guys should have seen it, Jeeps lining the whole parking lot of Charlie's on Airport Hwy and more on the inside parking area! Wish we could get a LOST M&G going like that with all the KJs and KKs!!

Hey Tom ..... David had his toy out again

and for the rest of you ..... for a comparison .... the red cherokee next to the SFA KJ has 5.5" of lift and 33's

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Wish I could of gone, headed up to Michigan for mother in laws viewing then funeral tomorrow.
I need to catch up with ya Larry!!!!!!!!!!!!!!!! :SOMBRERO:

cgass · **Posted:** Sun Apr 22, 2012 10:57 am

KJWildman wrote:

Hey Tom ..... David had his toy out again

An SFA KJ outside of Colorado...I don't believe it.

tommudd · **Posted:** Sun Apr 22, 2012 7:21 pm

They build them way better in Colorado
Not at all impressed with that one pictured.
Cobbled together yard ornament

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Yep, Larry's stinger has better welds that that thing for sure :shock:

Just like Tom said, it's better served sitting next to the gnome. :jester:

I have a major problem now......... 50,488 on the ticker :shock:

tommudd · **Posted:** Sun Apr 22, 2012 10:40 pm

50,000

try 169,700 on mine now :banghead:

of course Chris is at almost 199,000

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Gonna have to take my camera tomorrow also. Forgot to tell ya I ran across a 2wd Liberty that is slammed with hydraulics :shock:

I guess he either runs the store or owns it, had a hard time understanding his broken English and I don't think he understood Redneck slang too well. So if I walked away from the conversation understanding things correctly he'll be there tomorrow :jester:

Ted15 · **Posted:** Sun Apr 22, 2012 10:55 pm

Yesterday I installed two rigid industries led lights on a smittybilt fairhead mount. These things are bright. They cost a little more but not much.

Ted15 · **Posted:** Sun Apr 22, 2012 11:00 pm

tommudd wrote:

50,000

try 169,700 on mine now :banghead:

of course Chris is at almost 199,000

So, at what point is the SFA taking place? You're gettin pretty close to the 250,000 mark. :shock:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Ted15 wrote:

Yesterday I installed two rigid industries led lights on a smittybilt fairhead mount. These things are bright. They cost a little more but not much.

Ya know the rule, pic or it didn't happen. :goink:

Just thought I'd help out Nick since he isn't here :jester:

Ted15 wrote:

So, at what point is the SFA taking place? You're gettin pretty close to the 250,000 mark. :shock:

He's too chicken and wont do it, plus not only that he'd have to buy a welder and a bigger garage first. Ohhhhhhhhh wait the last 2 are in the works :twisted:

tommudd · **Posted:** Sun Apr 22, 2012 11:27 pm

Ted15 wrote:

tommudd wrote:

50,000

try 169,700 on mine now :banghead:

of course Chris is at almost 199,000

So, at what point is the SFA taking place? You're gettin pretty close to the 250,000 mark. :shock:

First I have to find a low mileage 04 KJ, black of course to install all of my lift parts/front rear diffs etc over onto. ( well 02-03-04 would work)
Then addition to the garage
then SFA

tommudd · **Posted:** Sun Apr 22, 2012 11:33 pm

KJWildman wrote:

Had to work again today! :evil:

But the money's good on Saturdays! :SOMBRERO:

Then came home and drove the XJ over to the Northwest Ohio Crawlers M&G a few miles up the road. There was a good turnout, probably around 30 vehicles. Including a Bronco II on 32's, a Durango with 4" of lift on 33" TSL's and an SFA KJ on 35's!! Realized after that I didn't get a pic of the Durango! :banghead:

It actually looked pretty good with a lift! Hart and Tom, you guys should have seen it, Jeeps lining the whole parking lot of Charlie's on Airport Hwy and more on the inside parking area! Wish we could get a LOST M&G going like that with all the KJs and KKs!!

Well from looking at the pics I have waved at over half of them and only got a couple of waves back and those were from women.
Not a very friendly lot are they ?
Where I come from you see someone new in the area in a 4 wheel drive no matter what it is you track them down, and introduce yourself. Up here they just drive by slowly and stare like ya have four heads or something :ROTFL:

Oh well

Ted15 · **Posted:** Mon Apr 23, 2012 12:21 am

BugginKJ wrote:

Ted15 wrote:

Yesterday I installed two rigid industries led lights on a smittybilt fairhead mount. These things are bright. They cost a little more but not much.

Ya know the rule, pic or it didn't happen. :goink:

Just thought I'd help out Nick since he isn't here :jester:

Ted15 wrote:

So, at what point is the SFA taking place? You're gettin pretty close to the 250,000 mark. :shock:

He's too chicken and wont do it, plus not only that he'd have to buy a welder and a bigger garage first. Ohhhhhhhhh wait the last 2 are in the works :twisted:

Ok, ok,I know. I planned to post some but I didnt take any when I tested them last night. I went to a dark place behind a closed mall with no lights to mess up the pics and here ya go...
The box

on the mount

on the KK (the winch is just sitting there)

headlights alone

with fogs

brights

spots alone

spote, headlights and fogs

the pics don't do the lights any justice at all.I think they'll do just fine.I think when I put on a roof rack I'll put two more spots and two floods up there. They draw very little power compared to halogen lights.

Marlon_JBT · **Posted:** Mon Apr 23, 2012 12:25 am

BugginKJ wrote:

50,488 on the ticker :shock:

Oh that's it? I remember 50,488.

Ted, where did you get those LEDs from?

Ted15 · **Posted:** Mon Apr 23, 2012 2:04 am

Marlon_JBT wrote:

BugginKJ wrote:

50,488 on the ticker :shock:

Oh that's it? I remember 50,488.

Ted, where did you get those LEDs from?

4WD Hardware in Parma

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Ted15 wrote:

.I went to a dark place behind a closed mall

My man Ted choose a closed hardware store, liquor store, maybe even a Sears store but mannnnnnnnnnnnnn stay away from the malls! We need ya in Toledo at Mudds Garage for more training asap! :jester:

THE OHIO CHAT ROOM!!!

Who is online