| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| new mod to the kj http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=113&t=56713 |
Page 1 of 1 |
| Author: | blackwidowkj06 [ Fri Nov 05, 2010 8:42 pm ] |
| Post subject: | new mod to the kj |
i have completed another mod and it has saved me $300 total... i went to advanced autoparts and bought a can of lens tint. cost me about $25 for a can of lens tint and two starred screws to take off my lights. done it all the same day and here's the finished product. what do you think? ![]() ![]() ![]() ![]() now all i need is a set of black wheels to top it off!!! it may look like there's places that i didn't do so well, but if you look closer; it's the reflection of the sky. i would have done another coat, but i thought 2 coats were enough. plus i didn't want the cops hassling me over it. even though it's KY, we still have some cops who "follow every rule"... |
|
| Author: | rokee1998 [ Fri Nov 05, 2010 8:48 pm ] |
| Post subject: | Re: new mod to the kj |
Looks Great Sarah! Try a set of these: http://www.quadratec.com/products/92613_14XX_B_PG.htm |
|
| Author: | blackwidowkj06 [ Fri Nov 05, 2010 9:03 pm ] |
| Post subject: | Re: new mod to the kj |
thanks dustin... and those wouldnt fit. theyre 15's i think this will be my next build guys (and gals)...
|
|
| Author: | infernicus [ Fri Nov 05, 2010 9:35 pm ] |
| Post subject: | Re: new mod to the kj |
15 inch rims will fit, as long as they are the correct backspace.. I personally enjoy the look of 15s over 16s, but it's hard to tell. (My decision to get 15s could have also had to do with the fact that I found 4 Cragars {and good tires!} for 125$ on Craigslist locally.) |
|
| Author: | blackwidowkj06 [ Fri Nov 05, 2010 9:42 pm ] |
| Post subject: | Re: new mod to the kj |
i know they will fit... i just want to stay with the 16" wheels since i already have 16" tires... |
|
| Author: | STINGN [ Sat Nov 06, 2010 3:08 pm ] |
| Post subject: | Re: new mod to the kj |
are your flairs line-x? how much did that cost ya |
|
| Author: | blackwidowkj06 [ Sat Nov 06, 2010 8:00 pm ] |
| Post subject: | Re: new mod to the kj |
STINGN wrote: are your flairs line-x? how much did that cost ya yes my front and rear bumpers, along with my fenders are line-xd. i actually went to the auto zone and bought over $100 in spray on bedliner cans, plus hours of work. it worked well, but i'm eventually going to buy the roll-on bedliner and put it on my jeep. whenever i get the time and money. |
|
| Author: | KJ_WHEELER_2010 [ Tue Nov 09, 2010 8:22 am ] |
| Post subject: | Re: new mod to the kj |
That looks badass. I did that to a truck I used to have....has me wondering if I should do it to my KJ now lol |
|
| Author: | tommudd [ Tue Nov 09, 2010 9:12 am ] |
| Post subject: | Re: new mod to the kj |
They do look good tinted, I did my first set on the KJ back in 04 , then got a pair of 06 tails last year and did them . heres a pic of the ones I have on now, they are actually darker than what the picture shows
|
|
| Author: | teckman02 [ Tue Nov 09, 2010 4:33 pm ] |
| Post subject: | Re: new mod to the kj |
i dont have a pic of them but tom your old ones still look good |
|
| Author: | blackwidowkj06 [ Tue Nov 09, 2010 4:51 pm ] |
| Post subject: | Re: new mod to the kj |
tommudd wrote: They do look good tinted, I did my first set on the KJ back in 04 , then got a pair of 06 tails last year and did them . heres a pic of the ones I have on now, they are actually darker than what the picture shows ![]() looks good Tom! I would have done a 3rd coat, but I didn't want them "too dark". Mine sorta have the smoked look up close but far away they looked black out. Now I'm saving the $$$ to buy Black Steel Cragar Soft 8 wheels Then at Spring time I'll be buying MT's and do a complete brake job. Do you suggest steel brake lines and from which site? Jeepinbyal?
|
|
| Author: | tommudd [ Tue Nov 09, 2010 5:03 pm ] |
| Post subject: | Re: new mod to the kj |
teckman02 wrote: i dont have a pic of them but tom your old ones still look good almost forgot where my old ones went to.Too many parts have made their way through here can't keep track any more |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|