Wow, long time no updates, getting ready to goto alaska to drive up the dalton highway:
New fridge is installed, watching the freezer temps:

Second deep cycle battery installed down on the left, new outlet wired to 800W inverter, two 12V outlets crammed into the old breaker box. New propane regulator hooked up with 1lb bottle adapter. The stock westy's have a much larger tank that mounts on the outside down low, this was used for both the stove and the old dometic fridge, since all I will be using for is the stove the 1lb bottle should work just fine.


So I used some 3/4" angle iron doubled up to make a ledge for the swivel seat:

Then I once all the welding was done I realized that I welded it in backwards.........YARG
After some correction. The seat swivels:


fridge sticks out a little further than the stock one did, but it doesn't mess up the interior space or anything:

_________________
http://www.Colorado4Wheel.com
"Its not about what you can
DO with your Jeep, its about where you can
GO with your Jeep."
Knowledgeable - But Caustic