LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Home Theater IR Receiver HELP!!!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=15&t=52610		 Page 1 of 1
Author:  Elt31987 [ Mon May 10, 2010 12:03 pm ]
Post subject:  Home Theater IR Receiver HELP!!!
Ok i just bought a new receiver and my only issue is going to be that it will sit in a wood cabinet and the IR Receiver wont be in view so probably wont work. The back of the receiver has a 3.5mm IR IN Seen here(http://insigniaproducts.com/cms/documen ... G%20EN.pdf) on page 2, my question is i was looking at (http://www.bestbuy.com/site/SpeakerCraf ... &cp=1&lp=8) or similar to plug into that 3.5mm port so that the receiver would be in site of the remote. The remote im going to Use is the Harmony 650. That Speakercraft adapter says "Requires regulated power supply, terminator block and emitter (not included)". Do i need any of these? Can you explain what these are? or can i just plug that 3.5mm in and it will work? Thanks
Author:  teckman02 [ Mon May 10, 2010 7:00 pm ]
Post subject:  Re: Home Theater IR Receiver HELP!!!
i would go with something like this
http://www.parts-express.com/pe/pshowdetl.cfm?&DID=7&Partnumber=182-448&ctab=1#Tabs


they sell good stuff i have never been un-happy with any purchase from them
Author:  bugnout [ Mon May 10, 2010 10:59 pm ]
Post subject:  Re: Home Theater IR Receiver HELP!!!
I have one of these for the last 4 years, works great

Hot Link Pro
Author:  Elt31987 [ Tue May 11, 2010 6:59 am ]
Post subject:  Re: Home Theater IR Receiver HELP!!!
Thanks for all the replies, anymore are welcome :mrgreen:
Author:  Edvalencia [ Tue May 11, 2010 2:27 pm ]
Post subject:  Re: Home Theater IR Receiver HELP!!!
Your receiver will provide the power & terminator block, *provided that the plug is compatible with your receiver*. The emitter would be your remote control.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/