Here is a picture of a Dyno Roadster that I'm going to build. But, I will have a few changes. BTW, the bike is 7.5 feet long and very low to the ground. It is sort of a cross between a low rider and a stretch cruiser.



I want to add LED turn signals to the front and back. Any suggestions on how to do that? The Dyno will have a 12v motorcycle/ATV battery for the lights. There will be a separate tail light too. Plus a headlight group (3).

Terry

_________________
2011 Ford F-150 XLT 4X4

when i added LED flush mount signals on my motorcycle the blink rate increased. like a vehicle would if one of your bulbs burnt out on one side the one left would flash like twice as fast. i remedied this by ordering a plug and play relay from these guys. http://www.customled.com/products/flash ... _relay.htm it seems they have some good stuff on their site, maybe you can build what your looking for from these guys also.

That has got to put a huge smile on your face when riding! I think that is one of the coolest bikes I have ever seen
http://www.harrisonspecialties.com/
These guys have some reallly nice LED lights, maybe something you can use.

Thanks for the links. I'll check them out for sure. The biggest difference between my bike and the one pictured will be the gas tank. I am going to have a custom tank built that will fill in the area between bars instead of a tank setting on top of them.

Terry

_________________
2011 Ford F-150 XLT 4X4

I like that open space, I was thinking a teardrop shaped tank that is longer and sleeker to sit on top. Either way ya going I am sure it is going to be sweet!