I'm working that day.. Definitely can't take off.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Aug 2010 Long Island Lift Party http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=23&t=54800 |
Page 1 of 2 |
| Author: | Jeepin_it_real [ Sun Aug 08, 2010 11:31 pm ] |
| Post subject: | Aug 2010 Long Island Lift Party |
Let's do it August 21st who's in? |
|
| Author: | infernicus [ Mon Aug 09, 2010 12:10 am ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
I'm working that day.. Definitely can't take off.
|
|
| Author: | Vranes17 [ Mon Aug 09, 2010 2:56 pm ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
I could swing that day most likely |
|
| Author: | Jeepin_it_real [ Mon Aug 16, 2010 9:12 pm ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
So I'm pulling apart my rig this Saturday... Gunna put in a rear spacer and some isolators, also changing over to Bilstein shocks in the front I'm gunna install the RK clevis, boilers top plate, JBA arms and Bilstein shocks Gunna start at like 8 am I have a compressor and air ratchet, impact wrench, impact sockets, four 3 ton jack stands, a 3 ton jack, creeper, and a big effin hammer Am I missing anything? send me a PM if you wanna join! this just needs to get done as I start school again in September and I will have no time then, so I want to knock this project out. |
|
| Author: | VMKJCRD [ Mon Aug 16, 2010 9:35 pm ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
I may be able to stop by until 12 and i wouldn't mind at all if you want to start at 7 You should definitely get this. You can find this stuff at walmart and if you cant let me know, ill take a quick drive tomorrow to the one by me and pick some up. this stuff helped us a lot. The only thing this stuff didnt work on was the bumpstops. lol |
|
| Author: | LI_KJ [ Mon Aug 16, 2010 10:32 pm ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
VMKJCRD wrote: I may be able to stop by until 12 and i wouldn't mind at all if you want to start at 7 You should definitely get this. You can find this stuff at walmart and if you cant let me know, ill take a quick drive tomorrow to the one by me and pick some up. this stuff helped us a lot. The only thing this stuff didnt work on was the bumpstops. lol PB he puts that sh*t on everything! |
|
| Author: | LI_KJ [ Mon Aug 16, 2010 10:33 pm ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
Jeepin_it_real wrote: So I'm pulling apart my rig this Saturday... Gunna put in a rear spacer and some isolators, also changing over to Bilstein shocks in the front I'm gunna install the RK clevis, boilers top plate, JBA arms and Bilstein shocks Gunna start at like 8 am I have a compressor and air ratchet, impact wrench, impact sockets, four 3 ton jack stands, a 3 ton jack, creeper, and a big effin hammer Am I missing anything? send me a PM if you wanna join! this just needs to get done as I start school again in September and I will have no time then, so I want to knock this project out. I think I should be available in the morning-early afternoon to come hang and help. I got a set of ratchets and doo dads that are always in the back of the KJ. Lemme just firm up some details before I can say I will def be there. Where on the island are you located? KK lift=  Quote: Am I missing anything? 
|
|
| Author: | VMKJCRD [ Mon Aug 16, 2010 11:10 pm ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
LI_KJ wrote: Jeepin_it_real wrote: So I'm pulling apart my rig this Saturday... Gunna put in a rear spacer and some isolators, also changing over to Bilstein shocks in the front I'm gunna install the RK clevis, boilers top plate, JBA arms and Bilstein shocks Gunna start at like 8 am I have a compressor and air ratchet, impact wrench, impact sockets, four 3 ton jack stands, a 3 ton jack, creeper, and a big effin hammer Am I missing anything? send me a PM if you wanna join! this just needs to get done as I start school again in September and I will have no time then, so I want to knock this project out. I think I should be available in the morning-early afternoon to come hang and help. I got a set of ratchets and doo dads that are always in the back of the KJ. Lemme just firm up some details before I can say I will def be there. Where on the island are you located? KK lift= Quote: Am I missing anything? and some for the morning  |
|
| Author: | luigi1285 [ Mon Aug 16, 2010 11:19 pm ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
with the rk forks dont forget the spread the gap a bit before trying to put them on the bottom of the strut otherwise you will never get them in... and also dont forget a rachet strap to tie to the knuckle to prevent your cv from pulling out |
|
| Author: | Jeepin_it_real [ Tue Aug 17, 2010 12:06 am ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
didnt think of the ratchet strap... spread the forks???? |
|
| Author: | Jeepin_it_real [ Tue Aug 17, 2010 12:07 am ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
I'm located in Bethpage |
|
| Author: | Jeepin_it_real [ Tue Aug 17, 2010 7:47 pm ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
borrowing spring compressors from a buddy... just need a ratchet strap... but one of my other buddies may have one... so whos stopping by/ helpin? PM me and i'll send you an address |
|
| Author: | luigi1285 [ Tue Aug 17, 2010 8:17 pm ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
you have to spread the top of the clevis fork slightly where the strut slides in other wise you will go NUTSSS tryen to get it on..i did it with a small pry bar and my hand... def use a vise if you have one |
|
| Author: | LI_KJ [ Tue Aug 17, 2010 9:17 pm ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
Jeepin_it_real wrote: borrowing spring compressors from a buddy... just need a ratchet strap... but one of my other buddies may have one... so whos stopping by/ helpin? PM me and i'll send you an address I have a few ratchet straps in the back of the Jeep. |
|
| Author: | Vranes17 [ Wed Aug 18, 2010 12:17 pm ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
I think Ill be able to stop by, got a 3 ton jack if you need it, just let me know. |
|
| Author: | Jeepin_it_real [ Thu Aug 19, 2010 9:31 am ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
official height adjustment starts at 08:00 hours on Saturday 
|
|
| Author: | BennyMigs [ Thu Aug 19, 2010 12:11 pm ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
Hey Guys I'm just tuning in. I have to work Saturday  . PM me next time something is going on I dont get on the site as much as I want to but I alwasy check my e-mail. On the 25th I should have a pair of JBA Arms at my door. Who is in for a Monday Arm install in the next few weeks? I may also get boilers spacer.
|
|
| Author: | Jeepin_it_real [ Thu Aug 19, 2010 10:34 pm ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
hey benny... i will be doing both of those so i'll let you know if i can show up and give some input haha |
|
| Author: | luigi1285 [ Thu Aug 19, 2010 11:47 pm ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
ya i got lotsss of stuff to do ... just building up my stock pile 
|
|
| Author: | Jeepin_it_real [ Thu Aug 19, 2010 11:50 pm ] |
| Post subject: | Re: Aug 2010 Long Island Lift Party |
well my stock pile still wont be smaller aftert the lift... got even more parts now that i ordered lol |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|