mine are in but ill give a hand they were real easy to install i was surprised. my only tip is mount them then paint em to avoid beating up the paint just my
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Slider Install party http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=23&t=58042 |
Page 1 of 3 |
| Author: | Jeepin_it_real [ Thu Jan 06, 2011 5:01 pm ] |
| Post subject: | Slider Install party |
Just got mine back from being all painted up... As soon as these snow storms are over whos up for an install... I'll bring the hot Cocoa |
|
| Author: | luigi1285 [ Thu Jan 06, 2011 9:18 pm ] |
| Post subject: | Re: Slider Install party |
mine are in but ill give a hand they were real easy to install i was surprised. my only tip is mount them then paint em to avoid beating up the paint just my
|
|
| Author: | Jeepin_it_real [ Thu Jan 06, 2011 10:27 pm ] |
| Post subject: | Re: Slider Install party |
well i did it backwards then.. either way i'll just be careful and anything i screw up i'll just touch up haha |
|
| Author: | Jeepin_it_real [ Thu Jan 06, 2011 10:29 pm ] |
| Post subject: | Re: Slider Install party |
did you just follow the KJ install?... i havent really looked at it too much... i'm guessing i need to drill some holes huh? |
|
| Author: | DirtyKK [ Thu Jan 06, 2011 10:30 pm ] |
| Post subject: | Re: Slider Install party |
what sliders you get? |
|
| Author: | Jeepin_it_real [ Thu Jan 06, 2011 10:35 pm ] |
| Post subject: | Re: Slider Install party |
super skinks |
|
| Author: | DirtyKK [ Thu Jan 06, 2011 10:41 pm ] |
| Post subject: | Re: Slider Install party |
install is super easy. hold the sliders into place and mount it down with the 3 bolts on the seam. mark holes to be drilled on unibody frame. remove sliders. drill holes. i recommend getting a good drill bit, little pricey but totally worth not having the hassle. i drilled a pilot hole, larger hole and used a step up drill bit to get the right size. mount it up. my sliders are beat. i really need to touch up the paint before they start rusting. 
|
|
| Author: | Jeepin_it_real [ Thu Jan 06, 2011 10:53 pm ] |
| Post subject: | Re: Slider Install party |
thanks for the input.... i got some really good bits since my dad used to do metal work so I'm clear in that department |
|
| Author: | audiboy86 [ Thu Jan 06, 2011 11:02 pm ] |
| Post subject: | Re: Slider Install party |
I used a nice Unibit bit to drill mine went really nice and easy plus could easily choose my size and go up easily without having to change bits. Also and air wrench with a good extension would be suggested or just a good exstension. |
|
| Author: | Jeepin_it_real [ Fri Jan 07, 2011 8:42 pm ] |
| Post subject: | Re: Slider Install party |
No takers.for a.install party Sent from my Dell Streak using Tapatalk |
|
| Author: | Vranes17 [ Fri Jan 07, 2011 11:11 pm ] |
| Post subject: | Re: Slider Install party |
Jeepin_it_real wrote: No takers.for a.install party Sent from my Dell Streak using Tapatalk Im so down, just got in from boarding in Vermont, time and place? |
|
| Author: | Jeepin_it_real [ Sat Jan 08, 2011 1:32 pm ] |
| Post subject: | Re: Slider Install party |
well lets try to get a few more guys in and then we will work it out then |
|
| Author: | VMKJCRD [ Sat Jan 08, 2011 8:58 pm ] |
| Post subject: | Re: Slider Install party |
I'm down to. |
|
| Author: | LI_KJ [ Sun Jan 09, 2011 1:25 am ] |
| Post subject: | Re: Slider Install party |
VMKJCRD wrote: I'm down to. I'm ready to go as well. Just need a garage and some hot chocolate. |
|
| Author: | infernicus [ Mon Jan 10, 2011 3:41 am ] |
| Post subject: | Re: Slider Install party |
Me, me, me too. You tell me when.. I am there. Watch those jibs! |
|
| Author: | LI_KJ [ Mon Jan 10, 2011 6:36 pm ] |
| Post subject: | Re: Slider Install party |
Whose got some garage space that we can get these things under the Jeeps? Or will we have to wait till spring? It's killing me walking by them in the basement and not walking by them when they are under the Jeep! Bueller??? 
|
|
| Author: | Jeepin_it_real [ Mon Jan 10, 2011 7:38 pm ] |
| Post subject: | Re: Slider Install party |
I really wanna get mine on, i have a garage unfortunately none of our jeeps will fit in it.. not because its not big enough inside, but the door wont allow for it... |
|
| Author: | bunkermonkeycw [ Mon Jan 10, 2011 8:39 pm ] |
| Post subject: | Re: Slider Install party |
I don't have sliders to install now but would enjoy hanging and riding after... Ill watch to see if you get some space. I'm in PA and have access to a garage but alas, the door size prevails. |
|
| Author: | LI_KJ [ Mon Jan 10, 2011 9:19 pm ] |
| Post subject: | Re: Slider Install party |
Jeepin_it_real wrote: I really wanna get mine on, i have a garage unfortunately none of our jeeps will fit in it.. not because its not big enough inside, but the door wont allow for it... The rents won't mind a little 'renovation' on the garage? I got a sawzall and a few blades! 
|
|
| Author: | Jeepin_it_real [ Tue Jan 11, 2011 12:49 am ] |
| Post subject: | Re: Slider Install party |
lol i wish that was the case haha... you don't know how often i'd be working on my jeep if i had access to the garage... late light work is the best kind |
|
| Page 1 of 3 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|