LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Waco Lift Install Party!!! (and meeting)
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=25&t=4902		 Page 1 of 7
Author:  RaeRae1616 [ Fri Jan 13, 2006 2:21 am ]
Post subject:  Waco Lift Install Party!!! (and meeting)
Hey everyone!

I've been discussing with KJTX about my ambitions for my KJ and he's offerred to help me out with my Lift. Anyone else that is interested and wants to help, hang out, or work on theirs is welcome!

We're currently planning for Saturday, February 11, 2006, and it'll probably in or around the Houston area.

If you are interested, or have any ideas/input please let us know!

FYI: I'm new to the Forum here so most don't know me, yet, but I've been lurking around for a while now.
The wealth of information available here is amazing and has been extremely helpful. Thanks to all who participate here!

Proud Liberty Owner in Houston,
Brandon
Author:  Edwin [ Fri Jan 13, 2006 8:29 am ]
Post subject: 
Where at in Houston? I'll try and make it. KJTX helped me with my lift.
Author:  KJTX [ Fri Jan 13, 2006 12:16 pm ]
Post subject: 
Where is yet to be determined. RaeRae1616 doesn't have a driveway, meaning we'd have to use the street or a parking lot, neither of which is ideal.

So, is there anyone else is Houston that would like to join us and wouldn't mind offering the use of their driveway? It would be much appreciated.

Thanks in advance.
Author:  RaeRae1616 [ Mon Jan 16, 2006 1:41 am ]
Post subject:  Lift Party Location - Help?
I did some checking this weekend, and I dont' have access to anywhere (other than a school/mall parking lot) that would facilitate the "Party" should some guys wanna join us.

So, yeah, if anyone else has a location that we could use, it would be greatly Appreciated!!!

Anyone have any ideas?
Author:  Edwin [ Mon Jan 16, 2006 1:59 am ]
Post subject: 
If y'all wanted to drive here, I have access to a shop with a lift that we could probably use. Just an idea.
Author:  RaeRae1616 [ Mon Jan 16, 2006 12:25 pm ]
Post subject: 
Edwin wrote:
If y'all wanted to drive here, I have access to a shop with a lift that we could probably use. Just an idea.


Edwin,

Where would "here" be? That shop with a lift is definitely an Idea!

Brandon
Author:  KJTX [ Mon Jan 16, 2006 1:46 pm ]
Post subject: 
He's in West, TX (the city is named West). It's about 20 minutes north of Waco on I-35. that lift came in real handy when I helped him install his lift.
Author:  hillcountrykj [ Mon Jan 16, 2006 2:20 pm ]
Post subject: 
I think it is worth the drive for the lift RaeRae. I did mine in my brothers driveway with a floor jack. A lift would have made it a lot eaiser.
Author:  hillcountrykj [ Mon Jan 16, 2006 2:24 pm ]
Post subject: 
That would all so be the second weekend in Feb. maybe we could use that day to get together and have a meeting.Hows bout it?
Author:  KJTX [ Mon Jan 16, 2006 4:20 pm ]
Post subject: 
Adding a meeting to the day is a great idea. The shop is actually in Waco, so there's plenty of places to eat.

RaeRae- If you want to use the lift, let us kow pretty quick. I'll call Edwin and let him know so he can go ahead and "reserve" the lift.
Author:  RaeRae1616 [ Tue Jan 17, 2006 1:44 am ]
Post subject: 
Yeah, I'm definitely interested in using the Lift . . . whatever will make things easier and to do things properly.

I just talked with my roommate and his Uncle lives in Waco, TX. So that could work out just fine for us to come up on Friday night and crash there and meet up on Saturday.

I don't mind driving at all . . . Question: Will driving ~200 miles after installing the lift be a big deal since an alignment is needed after the installation?

I'll be verifying that we can crash with his Uncle so go ahead with those plans if it works out. And, it'd be great to meet some other folks from around there if ya'll arrange a meeting . . . :-)
Author:  Edwin [ Tue Jan 17, 2006 8:57 am ]
Post subject: 
RaeRae1616 wrote:
Yeah, I'm definitely interested in using the Lift . . . whatever will make things easier and to do things properly.

I just talked with my roommate and his Uncle lives in Waco, TX. So that could work out just fine for us to come up on Friday night and crash there and meet up on Saturday.

I don't mind driving at all . . . Question: Will driving ~200 miles after installing the lift be a big deal since an alignment is needed after the installation?

I'll be verifying that we can crash with his Uncle so go ahead with those plans if it works out. And, it'd be great to meet some other folks from around there if ya'll arrange a meeting . . . :-)



I still have to make sure we can use the lift. I'll try and check on that today.
Unless your alignment is out of whack to start with, you probably won't need to do anything to it but set the toe. We can get it dern close. Driving 200 miles will not be a problem.
Author:  chemguy [ Tue Jan 17, 2006 2:28 pm ]
Post subject: 
We could use the top level of my parking garage. Noone ever parks up there and you have plenty of light. Either way, count me in as another helping hand with tools.
Author:  chemguy [ Tue Jan 17, 2006 2:32 pm ]
Post subject: 
OK, if Waco is the place, what about installing control arms and ball joints on my heap? 8)
Author:  Edwin [ Tue Jan 17, 2006 7:57 pm ]
Post subject: 
The use of the lift is a go! :wink: Yes Chemguy, c,mon. :wink:
Author:  hillcountrykj [ Tue Jan 17, 2006 8:10 pm ]
Post subject: 
count me in too. I just need directions and what on time Saturday. The earlier we start the better.
Author:  Edwin [ Tue Jan 17, 2006 8:11 pm ]
Post subject: 
hillcountrykj wrote:
That would all so be the second weekend in Feb. maybe we could use that day to get together and have a meeting.Hows bout it?



Sounds goot! Let's do it! :wink:
Author:  Edwin [ Tue Jan 17, 2006 8:19 pm ]
Post subject: 
It wuld also be helpful if every one that's coming could pm me, and leave a cell # so I can call them with directions.

Thanks,
David Edwin
Author:  RaeRae1616 [ Tue Jan 17, 2006 8:27 pm ]
Post subject: 
Excellent!!!

I've got my Frankenlift on the way, so I should be ready to go . . .

What about tools, equipment, etc... I don't have much in the way of auto tools (all home improvement type tools) but do we need to get a list going to make sure we have all that we need?

Brandon
Author:  hillcountrykj [ Tue Jan 17, 2006 9:00 pm ]
Post subject: 
All right guys I posted this in the trail rides and meeting section. Maybe we could get some peeps to come.
Page 1 of 7 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/