i have a spacer kit i just dont feel comfortable trying to install. i couldnt tell you want a cv joint is or what it does. Sway bar, no clue. i have 2 jack stands and a floor jack that have been loaned to me for this. i also have 2 friends with floor jacks and another with 2 more jack stands. if anyone around here has done ANYTHiING like this before that would be willing to help me let me know. I cant afford to have this kit professionally installed but i dont have the experience to put it on, nor do any of my frends. please help.

_________________

drive up to Toledo and I will train you out on installing a lift, expect to spend two to three hours here and bring cold Coke and munchies.

Tom

hey cheaper than a garage and I have all the tools you need plus a OTT door stop

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

If you can drive to Elgin, IL the wife and I could help ya out.

_________________
Aaron

A vehicle isn't yours till you learn to wrench on it yourself.

2002 Jeep Liberty Sport (Eugene, I am the Passenger, And I ride and I ride.)
1999 Chev Astro 2WD (Green, Daily Driver)
1997 Chev Astro AWD (Grumpy "The Heep", $250 Rally Van, 335k miles, 2" lift, 31" tires)

And if you go to Elgin, maybe get a run with the Elgin crowd through The Cliffs Park, down more my way.

i'll have to see how much i got left on my check after the y pipe and stuff gets fixed. i may have to wait another 2 weeks

_________________

Matt,

My brother helped me install my Daystar lift kit. If your spacer kit has instructions, I can help. My install -- almost two years ago -- wasn't that hard, apart from using the manual strut compressor. Even with air tools and impact wrench, it took too long, about 4 hours for the front. Before you do anything, I suggest contacting a small locally-owned garage to arrange for them compress the strut assemblies once you remove them. Schedule the job in advance and you will keep the installation time to about 2-3 hours total.

Depending on how far away you live and how complete your instructions are, I can probably offer some assistance.

TJB

_________________
2003 Liberty Sport
Bright Silver Metallic
Daystar lift
General Tire Grabber AT2 245/70R16

im going to get new shocks first. on the 30th i have to get my flowmaster installed so i may not have enough for shocks.

_________________