LOST JEEPS :: View topic - IL Lost Meet

501 wrote:

Hopefully by then I'll have things right with my front end and can get over there. It's about a 1½ hour drive though. We'll find out next Saturday if things will be working alright.

What's up with the front end?

Mine does that too, but I've been chalking it up to poor quality lift. :roll:

Of course, after helping do callaway's tie rod ends over the weekend, I really want to check mine out. Did you check there?

yellocoyote wrote:

Mine does that too, but I've been chalking it up to poor quality lift. :roll:

Of course, after helping do callaway's tie rod ends over the weekend, I really want to check mine out. Did you check there?

It's been doing it since Iswitched the lift from Daystar to OME. I've checked everything I could and everything else is good. When I rock the rig from side to side you can hear noise coming from the upper part of the wheel well. The new A-arms are good and tight so I'm pretty sure it's the strut nut.

JBA a-arms on the way for me (hopefully they'll get here today/tomorrow)...

yellocoyote wrote:

JBA a-arms on the way for me (hopefully they'll get here today/tomorrow)...

Need a hand installing?

Do we get to use your garage?

OK, i missed it last time I HOPE to make it this time, the problem this time may be, my car might be getting the lift on...how much $ should be brought?

STINGN wrote:

OK, i missed it last time I HOPE to make it this time, the problem this time may be, my car might be getting the lift on...how much $ should be brought?

Menu with prices
http://www.garibaldis.com/Garibaldis_Delivery.pdf

Author:	callaway [ Sun Feb 08, 2009 11:06 pm ]
Post subject:
Unless something comes up I'll be there

Author:	lionseye640 [ Mon Feb 09, 2009 9:35 am ]
Post subject:
1. yellocoyote/ihatemybike 1. lionseye640 Like Callaway said, I'll be there unless something major comes up before then

Author:	jeepfrog [ Mon Feb 09, 2009 10:52 am ]
Post subject:
You can count us in, too! 1. yellocoyote/ihatemybike 2. callaway 3. lionseye640 4. jeepfrog

Author:	STINGN [ Sat Feb 14, 2009 11:05 pm ]
Post subject:
I'll be at this one, lets just say...I kinda had a school dance the night before and played some "PONG"...so i didnt goto sleep till 6 and wake up till 1:30...but I'll be at the next one for sure

Author:	501 [ Sun Feb 15, 2009 2:28 pm ]
Post subject:
Hopefully by then I'll have things right with my front end and can get over there. It's about a 1½ hour drive though. We'll find out next Saturday if things will be working alright.

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

IL Lost Meet - Sunday, March 8th http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=26&t=40015	Page 1 of 2

Author:	501 [ Mon Feb 16, 2009 12:26 am ]
Post subject:
yellocoyote wrote: 501 wrote: Hopefully by then I'll have things right with my front end and can get over there. It's about a 1½ hour drive though. We'll find out next Saturday if things will be working alright. What's up with the front end? I think the top strut nut is loose. Got some major banging/thunking going on when I hit even small bumps. The A-arms are good and tight and I've checked all the other nuts and bolts so it's come down to the strut nut. I have a garage reserved for Saturday to take it all apart and see if that's the problem.

Author:	501 [ Mon Feb 16, 2009 8:49 pm ]
Post subject:
yellocoyote wrote: Mine does that too, but I've been chalking it up to poor quality lift. Of course, after helping do callaway's tie rod ends over the weekend, I really want to check mine out. Did you check there? It's been doing it since Iswitched the lift from Daystar to OME. I've checked everything I could and everything else is good. When I rock the rig from side to side you can hear noise coming from the upper part of the wheel well. The new A-arms are good and tight so I'm pretty sure it's the strut nut.

Author:	KJ-BOL [ Thu Feb 26, 2009 10:35 am ]
Post subject:
501 wrote: yellocoyote wrote: Mine does that too, but I've been chalking it up to poor quality lift. Of course, after helping do callaway's tie rod ends over the weekend, I really want to check mine out. Did you check there? It's been doing it since Iswitched the lift from Daystar to OME. I've checked everything I could and everything else is good. When I rock the rig from side to side you can hear noise coming from the upper part of the wheel well. The new A-arms are good and tight so I'm pretty sure it's the strut nut. Guys... I know it is off topic Please do not let this pass any longer CHECK YOUR BALLJOINTS... - I thought the same when mine had a little thump here an there and it almost killed me you do not want this to happen to you

Author:	callaway [ Thu Feb 26, 2009 10:53 am ]
Post subject:
yellocoyote wrote: JBA a-arms on the way for me (hopefully they'll get here today/tomorrow)... Nice Need a hand installing?

Author:	ihatemybike [ Thu Feb 26, 2009 8:57 pm ]
Post subject:
callaway wrote: yellocoyote wrote: JBA a-arms on the way for me (hopefully they'll get here today/tomorrow)... Need a hand installing? Do we get to use your garage?

Author:	callaway [ Fri Feb 27, 2009 3:32 pm ]
Post subject:
ihatemybike wrote: Do we get to use your garage? The garage space can be used on the condition that you provide the manual labor for moving the cj

Author:	oddball [ Tue Mar 03, 2009 7:04 pm ]
Post subject:
Can't make March. I hope to make it in April. I'd like to meet the locals.

Author:	tan's2002kjlimited [ Tue Mar 03, 2009 10:26 pm ]
Post subject:
Hope to be there.

Author:	STINGN [ Wed Mar 04, 2009 4:59 pm ]
Post subject:
OK, i missed it last time I HOPE to make it this time, the problem this time may be, my car might be getting the lift on...how much $ should be brought?

Author:	STINGN [ Thu Mar 05, 2009 4:52 pm ]
Post subject:
logan cant wait to see your sound system and CAI, im thinking of a CAI, i had my buddys from his KJ, his sister didnt want it in there cause she said it was ugly, so i took it and now we switched back before i could run with it

Page 1 of 2	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	lionseye640 [ Wed Mar 04, 2009 5:05 pm ]
Post subject:
STINGN wrote: OK, i missed it last time I HOPE to make it this time, the problem this time may be, my car might be getting the lift on...how much $ should be brought? Menu with prices http://www.garibaldis.com/Garibaldis_Delivery.pdf

Author:	STINGN [ Wed Mar 04, 2009 5:14 pm ]
Post subject:
ahhhh why thanks uyo! you*

Author:	tommudd [ Wed Mar 04, 2009 5:15 pm ]
Post subject:
lionseye640 wrote: STINGN wrote: OK, i missed it last time I HOPE to make it this time, the problem this time may be, my car might be getting the lift on...how much $ should be brought? Menu with prices http://www.garibaldis.com/Garibaldis_Delivery.pdf steak and cheese with fried onions please!!! :wink: Oh and STINGN buys everyones lunch that day for calling "a Jeep" his car

Author:	STINGN [ Wed Mar 04, 2009 7:06 pm ]
Post subject:
darn it...i usually call my buddys 1500 hemi a car

Author:	Logan [ Thu Mar 05, 2009 12:44 am ]
Post subject:
Hopefully i can make it sometime because i desperately need to do a clevis lift and i was hoping you guys could give me a hand! should i do isos in the rear as well. I just want to get the front level with the rear.