LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Just wondering..............
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=27&t=17595
Page 1 of 3

Author:  tjkj2002 [ Mon Feb 12, 2007 2:09 pm ]
Post subject:  Just wondering..............

Well I'm waiting on parts to do a major front end overhaul(new clips for cv's,lower control arms) and wondering if anybody local would like to help?No pressure though,just thought some poeple would like to know how to rip the front end apart and such.I don't want to drive to far so I don't ruin anything more then it is,I'll have all the tools necessary to.So if someone with a garage and some more poeple are interested learning how to rip the front end apart let me know,by the way I was thinking about doing it the 24rd-25th of this month(all parts should be hear by then)If parts get here by this coming weekend(17th-18th) will do it then.If no takers I'll do it at the base hobby shop here at Carson.

Author:  USAFCOP [ Mon Feb 12, 2007 3:29 pm ]
Post subject: 

Well, we were talking about this for last month, and now we have a subject to operate on. So will the weekend of the 24th work for a front end rebuild work shop?

We also need to get together to collect the dues for this year, as in the by-laws, Jan was renewal month :roll: postponed to snow though I guess :?

Author:  tjkj2002 [ Mon Feb 12, 2007 5:08 pm ]
Post subject: 

Man I got to work on the KJ and dish out money :wink: ! Well if anybody wants to the 24-25th it's going to be cause my LCA's won't arrive till 20th.I prefere to do it on the 24th cause I still have to get it aligned after but the 25th could work to depending if anybody wants to wrench a little.

Author:  Rock Lizard [ Mon Feb 12, 2007 6:54 pm ]
Post subject: 

I'd be up for it, atleast to watch, and provide a heater.:D I might be able to provide the shop space if your jeep will fit in the garage with your roof rack, and if I get some help moving these full width axles out of the way.

Author:  KW AV8R [ Mon Feb 12, 2007 8:02 pm ]
Post subject: 

I'm up for it as long as Jen is up for my being gone for the day (pregnancy difficulties). I would volunteer my garage but my hoopdie is going to be torn apart at that time.

Author:  RkyMtnKJ [ Mon Feb 12, 2007 8:07 pm ]
Post subject: 

i'd love to, but as im in college right now and thats taking up most of my time what with all the partying and snowboarding ill have to get back to you guys this summer and do a run with ya when im on the front range, wish i could see "how it works" sounds like fun.

Author:  USAFCOP [ Tue Feb 13, 2007 12:40 am ]
Post subject: 

well, the 25th will work best for me or I could show up late on Sat the 24th, as I have the Blue and Gold between 11 and 2. 3 Weblos moving up to boy scouts.

Author:  Tokyojoe [ Tue Feb 13, 2007 1:03 am ]
Post subject: 

Sunday would work for me.

Author:  Kugellager [ Tue Feb 13, 2007 12:58 pm ]
Post subject: 

Unfortunately I won't be available.

John
];')

Author:  tjkj2002 [ Tue Feb 13, 2007 3:06 pm ]
Post subject: 

Well lools like the 25th will work best,I'll call around to see where I can get a alignment done on sundays.Marty my KJ won't totally fit in your garage but hopefully it will bw nice that day.What time would be good to start?It will take at least acouple of hours(to be on the safe side)but when I get "in the mode" I do work fast.

Author:  Rock Lizard [ Tue Feb 13, 2007 10:43 pm ]
Post subject: 

Troy, this may be easier if we do it at one of the Auto hobby shops. I will check the rules on helpers at the USAFA one if you will check on the one at Carson. The vehicle should not be an issue, as you are mil, just the number of helpers. USAFA will be easier to get the civilians on, but I have never been to Carson's, and I do not know how long it would take to sponsor every one on. USAFA is an open tourist attraction again now between 08 and 1800. If this sounds good to you, I will check USAFA auto hobby tomorrow. This way we will have a lift and heat...

Ted

Gee go figure... guess where I am :roll:

Author:  Tokyojoe [ Tue Feb 13, 2007 10:52 pm ]
Post subject: 

Could also be a good time to do a rear diff cover change along with diff fluid change......hint hint. Actaully, I want to get mine painted before installing. Hmmmm........Galvinize it. Just as I have been talking about it so much over the last year. I wonder how that holds up to hot diff fluid on the inside. Shouldn't be an issue. I would think. Would look interesting on the outside. Can also paint it after galvinizing.

So, I wouldn't be doing a diff cover change yet.

Author:  tjkj2002 [ Tue Feb 13, 2007 10:58 pm ]
Post subject: 

Quote:
Gee go figure... guess where I am
:lol: :lol: :lol: :lol: :lol: Sure Ted,the airforce hobby shop sounds good,the one here on carson are pretty strict so I'm almost positive they won't allow it but I'll check tomorrow.Just inquired mostly for a get toghether to wrench a BS.Looks like most of us planning on coming are military so it's probally not going to be a big deal there at the academy.

Author:  nails023 [ Wed Feb 14, 2007 10:42 pm ]
Post subject: 

I work nights that weekend but I could make it for a little while before I have to go in.

Author:  USAFCOP [ Thu Feb 15, 2007 12:23 am ]
Post subject: 

well, USAFA auto hobby said it would be fine, and lift 12 would be best. They are open from 09-1700 on Sundays.

Author:  Weegie5 [ Thu Feb 15, 2007 10:56 pm ]
Post subject: 

I'd like to come, lend a hand, and meet some of you- and it would be a good excuse to buy some stuff from Rock Lizard.

Author:  tjkj2002 [ Thu Feb 15, 2007 11:49 pm ]
Post subject: 

Quote:
USAFCOP

well, USAFA auto hobby said it would be fine, and lift 12 would be best. They are open from 09-1700 on Sundays.
That's good cause the auto place here doesn't like big crowds around 1 vehicle.When and where does everyone want meet? Just a reminder my parts may not be here on time(place messed up and they should be hear on time but that could change)but in anycase still can meet everyone.Earlier the better but can work it for anybody that want's to come.

Author:  Tokyojoe [ Fri Feb 16, 2007 1:19 am ]
Post subject: 

I do have rear spring isolators that could use installing.

Is there an IHOP near Academy Blvd & I25?

Author:  Weegie5 [ Fri Feb 16, 2007 1:37 am ]
Post subject: 

Tokyojoe wrote:
Is there an IHOP near Academy Blvd & I25?


As a matter of fact, there is, right near Chapel Hills Mall.

Author:  USAFCOP [ Fri Feb 16, 2007 5:15 am ]
Post subject: 

Well, USAFA Auto Hobby really doesn't like huge crowds either, but like I said, if we can get stall 12, it is possible for up to 6 people, maube seven, so here is the list so far:

TJKJ2002
Me
Rock Lizard
TokyoJoe
WEEGIE
KWAV8R ??
NAILS??

Anybody else?

Also, bring this years dues for the club...

Page 1 of 3 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/