LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

NEW DATE: Utah Installation 3/11/06 1:00
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=27&t=5381		 Page 1 of 3
Author:  Gordo [ Mon Jan 30, 2006 6:32 pm ]
Post subject:  NEW DATE: Utah Installation 3/11/06 1:00
LOST Rockies Utah:

The new date for the wrench-a-thon is set for Saturday March, 11 2006 at 1:00 PM.

We are going to hold this at Troysterr's home in Draper. If you would like to attend, PM him for the address.

Planning to Attend
Troysterr
Krazz1e
Gordo
PichFlat (possible)
Author:  Troysterr [ Mon Jan 30, 2006 10:13 pm ]
Post subject: 
It would have to be a Saturday for me. This Saturday is out...kid's birthday party.

All I can really offer is moral support, and my vague recollection of installing my lift. But I wouldn't mind taking a quick run afterwards to test the lift! (Although you're going to need to get it aligned before you drive it much.)
Author:  krazz1e [ Tue Jan 31, 2006 12:35 pm ]
Post subject: 
Well I can lend a hand. With the 3 of us we should be able to figure it out.

Sat's are good, except this sat... so maybe next or the next?
Author:  Gordo [ Tue Jan 31, 2006 2:09 pm ]
Post subject: 
I agree with the both of you. This Saturday probably won't be the best since it is Superbowl weekend and all. Also, we have some friends coming from out of town.

It sounds like maybe a week from Saturday would work good for everyone, so I am going to make an executive decision and set the date for Saturday February 11.

We still need to determine a place to get it done. Salt Lake is still central, so if anybody has any ideas, that would be great.

Thanks for the offers to help guys!
Author:  krazz1e [ Wed Feb 01, 2006 11:08 am ]
Post subject: 
Could we do it at your house Troy? I will bring as much tools as I can everyone do the same so we have everything.

Gordo can go get a spring compressor from checker the night before.
Author:  Gordo [ Mon Feb 06, 2006 2:48 pm ]
Post subject: 
Bump

Are the plans for this still in the works? Can anyone else come or host this? I am just trying to make sure that all of the plans fall in to place.

Thanks.
Author:  krazz1e [ Mon Feb 06, 2006 6:35 pm ]
Post subject: 
This Sat the 11th huh? Looked good last week but now my wife has to work so I may be stuck babysitting......however I will confirm on that tonight AND if so try to get my family to help cover, which i'm sure they'll be happy to do.
Author:  krazz1e [ Tue Feb 07, 2006 7:12 pm ]
Post subject: 
ok good news and probably bad news. good news is my wife is working but I got a baby sister. Bad news is there is possibly a trail run to a place called chainsaw near delta that I might go on. I posted about it to see if more people would like to go.

Now, I am not ditching you and will commit -- i will let you know tomorrow. By the way I need to swap out my u-joints so we could probably do it at the same time as your lift.
Author:  Gordo [ Wed Feb 08, 2006 11:44 am ]
Post subject: 
Whatever works for the group works for me. We still need to figure out the location of our get together. Like I said, I can do it in Orem, but SLC would be much more central. I hate to have you drive all the way down to UT county for this. Anyone else interested in coming? Bueller?
Author:  krazz1e [ Wed Feb 08, 2006 11:49 am ]
Post subject: 
Yeah, Troy's place is central... he's in draper. What's your schedule like sat Troy?
Author:  Troysterr [ Wed Feb 08, 2006 8:37 pm ]
Post subject: 
I'm central, but I've got very little in the way of tools. I've been holding off on committing to help, because I've played the past two weekends, and I keep telling my wife that I'll take a bike ride with her. But I bet I can get away with it if we do it in the morning.

In any case, I'd sure like to help out. I'll check with the wife ASAP, but unless something comes up, I think we can plan on doing it in my driveway.

I do have an old, cratchety floor jack and a pair of jack stands. I don't have any air tools, but we can take turns with the wrenches. :)

I'll PM you my address as we get closer.
Author:  LibertyN8 [ Wed Feb 08, 2006 9:03 pm ]
Post subject: 
I might be able to make it (morning) I only get every 3rd Sat off. man you guy's got my schedule figured out! my last Sat. we went wheelin' out to Lil' moab. I've got a good 2 ton floor jack and a couple stands. If i can't make it you can still use them. I will run them up to Troy's or Gordo can pick them up here. I'm pretty sure I'll be able to go though. Troy pls pm your address.(ps I made an offer on wally's frankenlift, cross your fingers for me!)
Author:  krazz1e [ Wed Feb 08, 2006 11:16 pm ]
Post subject: 
alright, i am in for this. I will bring my tools and we'll wrench out the lift and do my rear u-joints.

Anyone else got anything to do now's the time!

Name the time.
Author:  Troysterr [ Thu Feb 09, 2006 2:46 am ]
Post subject: 
PM'd my address to Krazz1e, Gordo, and LibertyN8.

Now if I can just remember to clear it with the boss...
Author:  krazz1e [ Fri Feb 10, 2006 11:08 am ]
Post subject: 
guys, I may have a change of plans. My u-joints have yet to show up!!!!!!!ordered them monday tracking says tomorrow, but what time??!

I may be late to this.... I'll keep you posted. :evil:
Author:  Gordo [ Sat Feb 11, 2006 12:08 am ]
Post subject: 
Bumped for the cancellation.
Author:  krazz1e [ Mon Feb 13, 2006 7:45 pm ]
Post subject: 
ok folks, this sat?? I got my u-joints and ready to go. Let me know. Next sat (25th) I have to work...

let me know so I can plan accordingly.
Author:  Troysterr [ Tue Feb 14, 2006 12:59 am ]
Post subject: 
Should be fine for me.
Author:  Gordo [ Tue Feb 14, 2006 10:14 am ]
Post subject: 
This Saturday works fine for me.
Author:  LibertyN8 [ Tue Feb 14, 2006 1:09 pm ]
Post subject: 
I have to work my next 3 Sat. :( Gordo remember to take mesurements before/after and post some pics! Good luck!
Page 1 of 3 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/