LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

can you cram the 3in lift on a 02?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=28&t=1495		 Page 1 of 1
Author:  My 02 KJ [ Tue Aug 30, 2005 7:52 pm ]
Post subject:  can you cram the 3in lift on a 02?
i was wondering if there was anyone who has made the 03 and up 3in lift fit under a 02. i read that the 03 and above are all 1" smaller.
Author:  Jeepin Al [ Tue Aug 30, 2005 9:21 pm ]
Post subject:  3 inch lift
I have done it, and right now wth around 55k on my lift and 74k on the Liberty, the CV joints are complaining and with the a-arms I designed I have no problem with spring to a-arm hitting (unless I go to 4 inch which I had for a while). I did wear the OEM upper ball joints in less than 10k miles however! I also wore out the rear upper ball joint prematurely, and due to the great amount of flex cracked one of the lower arm connections on the diff. I replaced the lower arms with ones that are about to rotate, thus flex with the rear.


Al
Author:  My 02 KJ [ Tue Aug 30, 2005 9:38 pm ]
Post subject: 
sounds lke more trouble then its worth ........hum im thinking about going for the 7in lift
Author:  uvalax236 [ Tue Aug 30, 2005 11:44 pm ]
Post subject: 
Im tellin you man, its not worth your time/money to do! Talk to S&N Fab about getting them to build you a solid axle.
Author:  My 02 KJ [ Wed Aug 31, 2005 8:29 am ]
Post subject: 
i found it :) rock krawler is coming out with a 2nd vr of the 7up lift and it comes with everying to do a SFA. Should be the same price so i cant think of any one picking ifs over SFA??? but its not due to come out till later this spring. i think im just going to wait. i mean i dont wanna dump all this $ into the kj and still have IFS but im sure that wait will be worth it
Author:  WV(0)IIIIIII(0) [ Wed Aug 31, 2005 8:31 am ]
Post subject: 
My 02 KJ wrote:
i found it :) rock krowler is releasing a 2nd vr of the 7up lift and it comes with everying to do a SFA but its not due to come out till later this spring. i think im just going to wait. i mean i dont wanna dump all this $ into the kj anfd still have ifs :(. but im sure that wait will be worth it

Good luck with all of that.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/