I am going to try to adjust my headlights. Does any one know the way they are supposed to be set? How far away from object and how high off the ground.

_________________
06' Liberty Sport, herculined all plastic, ome/rancho front with clevis and 3/8" top plate, 927 OME with to extra isolators, 265/75R16 howlers, 40 series flowmaster, front tow hooks, http://s852.photobucket.com/albums/ab82/JMSMN/

none of the new headlight inspection devices even check that anymore they just check the difference between the low and highbeam, how you get that out of adjustment i dont know, i never completely figured out how to operate those new contraptions either

i know i need to raise mine a bit though theyre probably 5-10 degrees low

post the suggested height measurements if you get them sourced from elsewhere i'd be interested in them as well

i used to use a piece of duct tape on the garage door but someone took it off lol

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632