hey everyone my name is scott gardner i recently bought a 2006 jeep liberty crd love the jeep. now for the bad i don't know where to post this so ill try here and see if anyone can point me in the right direction. the other day i started up the jeep about 40 out and started great turned lights on selected radio station put it in reverse and bang just died. tried to start is up and nothing will just keep cranking. read around and people suggested fuel filter needed changed so did that filled up the new filter with diesel and sure enough tried to prime it and it like the primer won't prime or build pressure when i open up the release valve nothing happens no air no fuel if i leave the valve open and hit the primer then air comes out but with it closed not building pressure. so my guess is the fuel housing is broke. so if the housing is broke where can i buy them? auto zone and oriellys cant even find the part number and dealerships cost an arm and a leg. and if there are any other suggestions im open to anything. also all fuses look to be fine.

Is this posted inCRD section, it should

Hello Scott welcome to the forums my name is Zachary I live in greenwood SC. And as far as the fuel filter head you can either get one from the dealer or swap to a Racor Style like they originally used over seas with these motors. Also the fuel filter heads are covered under a recall currently I would contact my dealer first before buying anything. Also in the mean time read Sir SAMs noob guide a lot of great info and a lot of help.

_________________
My CRD Build Thread
Soon to Come:more lights