Need to relocate your rear brake line? No problem.

I used a piece of scrap steel that can be had from any metal supermarket for about 30 cents. (provided they have an off cut program)

Its a piece of 1 inch wide, 2 3/4 inches long, 1/8 thick hot rolled steel.

Step 1: Unbolt the brake line (10mm)


Step 2: Move the brake line over one notch in the plastic retaining clip. Be CAREFUL!! Don't break it.


Step 3: Drill your 30 cent piece of steel with a 1/4 inch or 27mm or 5/16 (I didn't check, it was so simple) in the fashion shown below.


Step 4: Use random hardware or fasteners you have laying around to bolt the plate onto the KJ. Tada!

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --