It is currently Sun Aug 23, 2026 8:41 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 26 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: 16x7 or 16x8 wheels
PostPosted: Sun Feb 02, 2014 4:20 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
swiftv8 wrote:

Wow, I was just looking for kj's on 15" soft 8's and 31's, very nice. You say you have no rubbing and an OME lift. Do you also have any clevis or top plates up front or extra iso's in the rear? Also did you go with 15x7 or 15x8 and what backspace. I have a set of near new Grabber A/T 2 that I would love to re-purpose on the KJ.

Thanks


If thinking of running 31s get ready to regear or loosing a good bit of power and mileage

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: 16x7 or 16x8 wheels
PostPosted: Sun Feb 02, 2014 5:12 pm 
Offline
LOST Newbie

Joined: Thu Jan 23, 2014 7:40 pm
Posts: 65
I have factory gears in mine, with 15x7 wheels and 31's. But I have GDE turbo tune and aftermarket turbo, so I have plenty of power. Also I don't pay attention to fuel mileage, when it needs fuel I put some in it


Sent from my iPhone using Tapatalk


Top
 Profile  
 
 Post subject: Re: 16x7 or 16x8 wheels
PostPosted: Sun Feb 02, 2014 5:14 pm 
Offline
LOST Newbie

Joined: Thu Jan 23, 2014 7:40 pm
Posts: 65
My OME lift is a #948, not sure how much lift


Sent from my iPhone using Tapatalk


Top
 Profile  
 
 Post subject: Re: 16x7 or 16x8 wheels
PostPosted: Sun Feb 02, 2014 6:33 pm 
Offline
LOST Newbie

Joined: Sun Jul 04, 2010 9:55 pm
Posts: 27
Location: Sykesville, PA
tommudd wrote:
If thinking of running 31s get ready to regear or loosing a good bit of power and mileage


Ya I was wondering that, I imagine due to weight. The grabbers are load C and about 8 lbs lighter than the 245/75 load E I have now but the steels will probably stack that back on and then some. Unfortunately I don't have the CRD to hide the additional weight. :(

It's a tough decision, my factory aluminums are corroded and ugly and the tires are due for replacement before the trails open, and I have a nice set of 31's just sitting there. What to do, what to do?

_________________
03 KJ - OME 927/948 - 3 ring clevis - 1 extra upper per side


Top
 Profile  
 
 Post subject: Re: 16x7 or 16x8 wheels
PostPosted: Sun Feb 02, 2014 7:43 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
Pararig wrote:
I have factory gears in mine, with 15x7 wheels and 31's. But I have GDE turbo tune and aftermarket turbo, so I have plenty of power. Also I don't pay attention to fuel mileage, when it needs fuel I put some in it


Sent from my iPhone using Tapatalk

You CRD guys get a little more room for tire size before power loss verses the gasser versions.If you want to step up to 265/75's(32" tire) then yes you will notice some mpg and power loss thus needing to regear.For gassers it a 31" tire that really needs to be regeared.


Top
 Profile  
 
 Post subject: Re: 16x7 or 16x8 wheels
PostPosted: Sun Feb 02, 2014 9:41 pm 
Offline
LOST Newbie

Joined: Thu Jan 23, 2014 7:40 pm
Posts: 65
Ya for a gasser, I would deff regrear it


Sent from my iPhone using Tapatalk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 26 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com